Skip to content

Apple Valley · Zoning · I-P

Apple Valley I-P zoning: height, setbacks and lot size

In Apple Valley's I-P zone, generally buildings can be up to 100 ft tall, the front setback is 25 ft and the minimum lot size is 10 acres, with the conditions listed below (Apple Valley code, read October 2026).

Key points

  • Maximum building height: 100 ft
  • Minimum front setback: 25 ft (From local industrial streets; may be reduced proportionately on substandard lots.)
  • Minimum side setback: 0 ft (Interior side. Next to or across a street or alley from residential: 75 ft, or 100 ft if over 25 ft high.)
  • Minimum rear setback: 15 ft (The first table gives 15 ft. The summary table in the same section lists 25 ft; read the code.)
  • Minimum lot size: 10 acres

I-P is a zoning district in Apple Valley. Every value below was read from the Apple Valley Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in I-P

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
100 ft
§ 9.45.040 · code text
Table row “Height limitations [8] (feet)”, column “I-P”: 100
Minimum front setback
25 ft
Applies: From local industrial streets; may be reduced proportionately on substandard lots.
§ 9.45.040 · code text
Table row “From local industrial streets”, column “I-P”: 25
Minimum side setback
0 ft
Applies: Interior side. Next to or across a street or alley from residential: 75 ft, or 100 ft if over 25 ft high.
§ 9.45.040 · code text
Table row “Minimum interior side setback (2) (feet)”, column “I-P”: 0
Minimum rear setback
15 ft
Applies: The first table gives 15 ft. The summary table in the same section lists 25 ft; read the code.
§ 9.45.040 · code text
Table row “Minimum rear setback [7] (feet)”, column “I-P”: 15
Minimum lot size
10 acres
§ 9.45.040 · code text
Table row “Minimum lot area (acres)”, column “I-P”: 10

Uses in I-P

Uses the code's use tables allow in I-P, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in I-P:

  • Maximum building height: 35 ft — At the setback line next to or across a street or alley from residential; may rise 1 ft per 2 ft of added setback. § 9.45.040
  • Minimum front setback: 50 ft — From major or secondary streets § 9.45.040
  • Minimum side setback: 75 ft — For buildings twenty-five feet in height and adjacent to or across a street or alley from a residential use or district. § 9.45.040
  • Minimum side setback: 100 ft — For buildings over twenty-five feet in height and adjacent to or across a street or alley from a residential use or district. § 9.45.040
  • Minimum rear setback: 75 ft — For buildings twenty-five feet in height and adjacent to or across a street or alley from a residential use or district. § 9.45.040
  • Minimum rear setback: 100 ft — For buildings over twenty-five feet in height and adjacent to or across a street or alley from a residential use or district. § 9.45.040

Not on this page

We did not find a general stories, lot coverage, FAR, density limit for I-P in the zoning tables we read. The code may still set one elsewhere — check the Apple Valley Municipal Code.

Other Apple Valley zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Apple Valley's I-P zone?

100 ft — Apple Valley Municipal Code § 9.45.040.

What is the minimum front setback in Apple Valley's I-P zone?

25 ft (from local industrial streets; may be reduced proportionately on substandard lots) — Apple Valley Municipal Code § 9.45.040.

What is the minimum side setback in Apple Valley's I-P zone?

0 ft (interior side. Next to or across a street or alley from residential: 75 ft, or 100 ft if over 25 ft high) — Apple Valley Municipal Code § 9.45.040.

What is the minimum rear setback in Apple Valley's I-P zone?

15 ft (the first table gives 15 ft. The summary table in the same section lists 25 ft; read the code) — Apple Valley Municipal Code § 9.45.040.

What is the minimum lot size in Apple Valley's I-P zone?

10 acres — Apple Valley Municipal Code § 9.45.040.

General information, not legal advice.

Ask about an Apple Valley property in I-P

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Apple Valley