Arvin · Zoning · M-1
Arvin M-1 zoning: height, setbacks and lot size
In Arvin's M-1 zone, generally buildings can be up to 35 ft (2 stories) tall and the front setback is 40 ft from street centerline, with the conditions listed below (Arvin code, read October 2026).
Key points
- Maximum building height: 35 ft
- Maximum number of stories: 2 stories
- Minimum front setback: 40 ft from street centerline (along a secondary highway 45 ft from centerline, along a major highway 55 ft; )
- Minimum side setback: None required (20 ft when the side line abuts a street or residential zone)
- Minimum rear setback: None required (20 ft when the rear line abuts a street or residential zone; none when a dedicated public alley abuts the rear line)
M-1 (Limited Manufacturing Zone) is a zoning district in Arvin. Every value below was read from the Arvin Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in M-1
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 35 ft § 17.28.030 · code textThe maximum height for buildings in the M-1 zone shall be two (2) stories and not to exceed thirty-five (35) feet. |
|---|---|
| Maximum number of stories | 2 stories § 17.28.030 · code textThe maximum height for buildings in the M-1 zone shall be two (2) stories and not to exceed thirty-five (35) feet. |
| Minimum front setback | 40 ft from street centerline Applies: along a secondary highway 45 ft from centerline, along a major highway 55 ft; § 17.28.040 · code textA. In the M-1 zone, all buildings shall be located not nearer than forty (40) feet from the centerline of a street; provided, however, that along any secondary highway, as designated by the city's highway plan, a minimum setback of forty-five (45) feet from the centerline of the highway shall be required, and along any major highway, as designated by the city's highway plan, a minimum setback of fifty-five (55) feet from the centerline of the highway shall be required. Setback from the centerline of Bear Mountain Boulevard (State Route 223) shall be seventy-two (72) feet. |
| Minimum side setback | None required Applies: 20 ft when the side line abuts a street or residential zone § 17.28.050 · code textIn the M-1 zone, a side yard setback is not required, except that a minimum side yard of twenty (20) feet shall be provided when the side property line abuts a street or a residential zone. |
| Minimum rear setback | None required Applies: 20 ft when the rear line abuts a street or residential zone; none when a dedicated public alley abuts the rear line § 17.28.060 · code textIn the M-1 zone, a rear yard setback is not required, except that a minimum rear yard of twenty (20) feet shall be provided when the rear property line abuts a street or a residential zone; No rear yard setbacks are required when there is an existing public dedicated and accepted alley abutting the rear property line. |
When a different number applies
The code sets other values for particular lots, buildings or locations in M-1:
- Minimum front setback: 45 ft from highway centerline — Along a secondary highway designated by the city's highway plan § 17.28.040
- Minimum front setback: 55 ft from highway centerline — Along a major highway designated by the city's highway plan § 17.28.040
- Minimum front setback: 72 ft from highway centerline — Along Bear Mountain Boulevard (State Route 223) § 17.28.040
- Minimum side setback: 20 ft — When the side property line abuts a street or a residential zone § 17.28.050
- Minimum rear setback: 20 ft — When the rear property line abuts a street or a residential zone § 17.28.060
Not on this page
We did not find a general lot size, lot coverage, FAR, density limit for M-1 in the zoning tables we read. The code may still set one elsewhere — check the Arvin Municipal Code.
Other Arvin zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Arvin's M-1 zone?
35 ft — Arvin Municipal Code § 17.28.030.
What is the maximum number of stories in Arvin's M-1 zone?
2 stories — Arvin Municipal Code § 17.28.030.
What is the minimum front setback in Arvin's M-1 zone?
40 ft from street centerline (along a secondary highway 45 ft from centerline, along a major highway 55 ft; ) — Arvin Municipal Code § 17.28.040.
What is the minimum side setback in Arvin's M-1 zone?
None required (20 ft when the side line abuts a street or residential zone) — Arvin Municipal Code § 17.28.050.
What is the minimum rear setback in Arvin's M-1 zone?
None required (20 ft when the rear line abuts a street or residential zone; none when a dedicated public alley abuts the rear line) — Arvin Municipal Code § 17.28.060.
General information, not legal advice.
Ask about an Arvin property in M-1
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question