Skip to content

Brea · Zoning · C-G

Brea C-G zoning: height, setbacks and lot size

In Brea's C-G zone, buildings can be up to 35 ft tall, the front setback is 10 ft and the minimum lot size is 6,000 sq ft (Brea code, read October 2026).

Key points

  • Maximum building height: 35 ft
  • Minimum front setback: 10 ft
  • Minimum lot size: 6,000 sq ft
  • Maximum lot coverage: 50%

C-G (GENERAL COMMERCIAL ZONE) is a zoning district in Brea. Every value below was read from the Brea Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in C-G

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
35 ft
§ 20.236.040 · code text
Buildings and structures erected in the C-G Zone shall have a height no greater than thirty-five (35) feet.
Minimum front setback
10 ft
§ 20.236.040 · code text
Buildings and structures shall be located not less than ten (10) feet from the property line abutting a street.
Minimum lot size
6,000 sq ft
§ 20.236.040 · code text
No lot shall be less than six thousand (6,000) square feet.
Maximum lot coverage
50%
§ 20.236.040 · code text
The maximum building site coverage shall be fifty percent (50%) of the net area of the site.

When a different number applies

The code sets other values for particular lots, buildings or locations in C-G:

  • Minimum side setback: 40 ft — Adjacent to any residential zone § 20.236.040
  • Minimum rear setback: 40 ft — Adjacent to any residential zone § 20.236.040

Not on this page

We did not find a general stories, side setback, rear setback, FAR, density limit for C-G in the zoning tables we read. The code may still set one elsewhere — check the Brea Municipal Code.

Other Brea zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Brea's C-G zone?

35 ft — Brea Municipal Code § 20.236.040.

What is the minimum front setback in Brea's C-G zone?

10 ft — Brea Municipal Code § 20.236.040.

What is the minimum lot size in Brea's C-G zone?

6,000 sq ft — Brea Municipal Code § 20.236.040.

What is the maximum lot coverage in Brea's C-G zone?

50% — Brea Municipal Code § 20.236.040.

General information, not legal advice.

Ask about a Brea property in C-G

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Brea