Brisbane · Zoning · SP-CRO
Brisbane SP-CRO zoning: height, setbacks and lot size
In Brisbane's SP-CRO zone, the front setback is 25 ft and the minimum lot size is 1 acre (Brisbane code, read October 2026).
Key points
- Minimum front setback: 25 ft
- Minimum side setback: 15 ft (Interior side yards)
- Minimum rear setback: 20 ft (Interior lots)
- Minimum lot size: 1 acre
- Maximum lot coverage: 40%
SP-CRO (Sierra Point Commercial District) is a zoning district in Brisbane. Every value below was read from the Brisbane Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in SP-CRO
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Minimum front setback | 25 ft § 17.18.040 · code textFront setback: Twenty-five (25) feet; |
|---|---|
| Minimum side setback | 15 ft Applies: Interior side yards § 17.18.040 · code textInterior side yards: Fifteen (15) feet. |
| Minimum rear setback | 20 ft Applies: Interior lots § 17.18.040 · code textInterior lots: Twenty (20) feet. |
| Minimum lot size | 1 acre § 17.18.040 · code textThe minimum area of any lot in the SP-CRO district shall be one acre. |
| Maximum lot coverage | 40% § 17.18.040 · code textThe maximum coverage by all structures on any lot shall be forty percent (40%). |
When a different number applies
The code sets other values for particular lots, buildings or locations in SP-CRO:
- Minimum side setback: 20 ft — Exterior side yards § 17.18.040
- Minimum rear setback: 15 ft — Corner lots § 17.18.040
Not on this page
We did not find a general height, stories, FAR, density limit for SP-CRO in the zoning tables we read. The code may still set one elsewhere — check the Brisbane Municipal Code.
Other Brisbane zoning districts
Who this affects
Frequently asked questions
What is the minimum front setback in Brisbane's SP-CRO zone?
25 ft — Brisbane Municipal Code § 17.18.040.
What is the minimum side setback in Brisbane's SP-CRO zone?
15 ft (interior side yards) — Brisbane Municipal Code § 17.18.040.
What is the minimum rear setback in Brisbane's SP-CRO zone?
20 ft (interior lots) — Brisbane Municipal Code § 17.18.040.
What is the minimum lot size in Brisbane's SP-CRO zone?
1 acre — Brisbane Municipal Code § 17.18.040.
What is the maximum lot coverage in Brisbane's SP-CRO zone?
40% — Brisbane Municipal Code § 17.18.040.
General information, not legal advice.
Ask about a Brisbane property in SP-CRO
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question