Skip to content

Buellton · Zoning · M

Buellton M zoning: height, setbacks and lot size

In Buellton's M zone, buildings can be up to 45 ft tall, the front setback is 20 ft and the minimum lot size is No minimum (Buellton code, read October 2026).

Key points

  • Maximum building height: 45 ft
  • Minimum front setback: 20 ft
  • Minimum side setback: None required (Interior side; the street side needs 10 ft minimum)
  • Minimum rear setback: None required (Lots not next to residential zoning; next to residential zoning the minimum is 50 ft)
  • Minimum lot size: No minimum
  • Maximum lot coverage: 50%

M is a zoning district in Buellton. Every value below was read from the Buellton Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in M

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
45 ft
§ 19.02.220 · code text
Table row “Height limit”, column “M”: 45 ft. maximum
Minimum front setback
20 ft
§ 19.02.220 · code text
Table row “Front”, column “M”: 20 ft. minimum
Minimum side setback
None required
Applies: Interior side; the street side needs 10 ft minimum
§ 19.02.220 · code text
Table row “Side”, column “M”: 10 ft. minimum street side, none otherwise
Minimum rear setback
None required
Applies: Lots not next to residential zoning; next to residential zoning the minimum is 50 ft
§ 19.02.220 · code text
Table row “Rear”, column “M”: 50 ft. minimum adjacent to residential zoning, none otherwise
Minimum lot size
No minimum
§ 19.02.220 · code text
Table row “Minimum lot area”, column “M”: No minimum for new subdivisions or uses
Maximum lot coverage
50%
§ 19.02.220 · code text
Table row “Site coverage”, column “M”: 50% maximum

Uses in M

Uses the code's use tables allow in M, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in M:

  • Minimum side setback: 10 ft — street side § 19.02.220
  • Minimum rear setback: 50 ft — adjacent to residential zoning § 19.02.220

Not on this page

We did not find a general stories, FAR, density limit for M in the zoning tables we read. The code may still set one elsewhere — check the Buellton Municipal Code.

Other Buellton zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Buellton's M zone?

45 ft — Buellton Municipal Code § 19.02.220.

What is the minimum front setback in Buellton's M zone?

20 ft — Buellton Municipal Code § 19.02.220.

What is the minimum side setback in Buellton's M zone?

None required (interior side; the street side needs 10 ft minimum) — Buellton Municipal Code § 19.02.220.

What is the minimum rear setback in Buellton's M zone?

None required (lots not next to residential zoning; next to residential zoning the minimum is 50 ft) — Buellton Municipal Code § 19.02.220.

What is the minimum lot size in Buellton's M zone?

No minimum — Buellton Municipal Code § 19.02.220.

General information, not legal advice.

Ask about a Buellton property in M

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Buellton