Skip to content

Buena Park · Zoning · GMU

Buena Park GMU zoning: height, setbacks and lot size

In Buena Park's GMU zone, the front setback is 10 ft, the side setback limit is 8 ft and the rear setback limit is 8 ft (Buena Park code, read October 2026).

Key points

  • Minimum front setback: 10 ft
  • Minimum side setback: 8 ft (Main Building; interior side yard)
  • Minimum rear setback: 8 ft (Main Building)
  • Maximum floor area ratio (FAR): 1.0 (for non-residential uses)
  • Maximum density: 32.0 dwelling units per net acre

GMU is a zoning district in Buena Park. Every value below was read from the Buena Park Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in GMU

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Minimum front setback
10 ft
§ 19.720.010 · code text
Table row “Front Yard Setback”, column “GMU”: 10 feet
Minimum side setback
8 ft
Applies: Main Building; interior side yard
§ 19.720.010 · code text
Table row “Main Building”, column “GMU”: 8 feet
Minimum rear setback
8 ft
Applies: Main Building
§ 19.720.010 · code text
Table row “Main Building”, column “GMU”: 8 feet
Maximum floor area ratio (FAR)
1.0
Applies: for non-residential uses
See note 3 below the table in the code.
§ 19.708.010 · code text
Table row “GMU”, column “Floor Area Ratio (FAR) (for non-residential uses) (3)”: 1.0
Note 3: Parking structures are excluded from FAR calculations for Mixed-Use development.
Maximum density
32.0 dwelling units per net acre
See note 1 below the table in the code.
§ 19.708.010 · code text
Table row “GMU”, column “Base Residential Density (dwelling units per net acre) (1)”: 32.0
Note 1: For standards on density bonus, refer to Section 19.708.020 for Affordable Housing Bonus.

Uses in GMU

Uses the code's use tables allow in GMU, or allow with a permit. Each links to its page with the code section.

Not on this page

We did not find a general height, stories, lot size, lot coverage limit for GMU in the zoning tables we read. The code may still set one elsewhere — check the Buena Park Municipal Code.

Other Buena Park zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the minimum front setback in Buena Park's GMU zone?

10 ft — Buena Park Municipal Code § 19.720.010.

What is the minimum side setback in Buena Park's GMU zone?

8 ft (main Building; interior side yard) — Buena Park Municipal Code § 19.720.010.

What is the minimum rear setback in Buena Park's GMU zone?

8 ft (main Building) — Buena Park Municipal Code § 19.720.010.

What is the maximum floor area ratio (far) in Buena Park's GMU zone?

1.0 (for non-residential uses) — Buena Park Municipal Code § 19.708.010.

What is the maximum density in Buena Park's GMU zone?

32.0 dwelling units per net acre — Buena Park Municipal Code § 19.708.010.

General information, not legal advice.

Ask about a Buena Park property in GMU

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Buena Park