Skip to content

Butte County · Zoning · MU

Butte County MU zoning: height, setbacks and lot size

In Butte County's MU zone, generally buildings can be up to 35 ft tall and the front setback is None required, with the conditions listed below (Butte County code, read October 2026).

Key points

  • Maximum building height: 35 ft
  • Minimum front setback: None required (15 ft when adjacent to a residential zone)
  • Minimum side setback: None required (5 ft when adjacent to a residential zone)
  • Minimum rear setback: None required (10 ft when adjacent to a residential zone)

MU is a zoning district in Butte County. Every value below was read from the Butte County Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in MU

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
35 ft
§ 24-23 · code text
Table row “Structure Height (max.)”, column “MU”: 35 ft.
Minimum front setback
None required
Applies: 15 ft when adjacent to a residential zone
§ 24-23 · code text
Table row “Front”, column “MU”: None, except 15 ft. when adjacent to a residential zone
Minimum side setback
None required
Applies: 5 ft when adjacent to a residential zone
§ 24-23 · code text
Table row “Interior Side”, column “MU”: None, except 5 ft. when adjacent to a residential zone
Minimum rear setback
None required
Applies: 10 ft when adjacent to a residential zone
§ 24-23 · code text
Table row “Rear”, column “MU”: None, except 10 ft. when adjacent to a residential zone

Uses in MU

Uses the code's use tables allow in MU, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in MU:

  • Minimum front setback: 15 ft — when adjacent to a residential zone § 24-23
  • Minimum side setback: 5 ft — when adjacent to a residential zone § 24-23
  • Minimum rear setback: 10 ft — when adjacent to a residential zone § 24-23

Not on this page

We did not find a general stories, lot size, lot coverage, FAR, density limit for MU in the zoning tables we read. The code may still set one elsewhere — check the Butte County Municipal Code.

Other Butte County zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Butte County's MU zone?

35 ft — Butte County Municipal Code § 24-23.

What is the minimum front setback in Butte County's MU zone?

None required (15 ft when adjacent to a residential zone) — Butte County Municipal Code § 24-23.

What is the minimum side setback in Butte County's MU zone?

None required (5 ft when adjacent to a residential zone) — Butte County Municipal Code § 24-23.

What is the minimum rear setback in Butte County's MU zone?

None required (10 ft when adjacent to a residential zone) — Butte County Municipal Code § 24-23.

General information, not legal advice.

Ask about a Butte County property in MU

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Butte County