Skip to content

Calaveras County · Zoning · R3

Calaveras County R3 zoning: height, setbacks and lot size

In Calaveras County's R3 zone, buildings can be up to 45 ft tall and the front setback is 20 ft from property line or 50 ft from road centerline, whichever is greater (Calaveras County code, read October 2026).

Key points

  • Maximum building height: 45 ft
  • Minimum front setback: 20 ft from property line or 50 ft from road centerline, whichever is greater
  • Minimum side setback: 10 ft
  • Minimum rear setback: 20 ft

R3 is a zoning district in Calaveras County. Every value below was read from the Calaveras County Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in R3

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
45 ft
§ 17.05.030 · code text
Table row “Maximum Building Height (ft)”, column “R3”: 45
Minimum front setback
20 ft from property line or 50 ft from road centerline, whichever is greater
§ 17.05.030 · code text
Table row “Front”, column “R3”: 20 from property line or 50 from centerline of the road right-of-way or easement, whichever results in a greater setback from the road right-of-way or easement.
Minimum side setback
10 ft
§ 17.05.030 · code text
Table row “Interior Side”, column “R3”: 10
Minimum rear setback
20 ft
§ 17.05.030 · code text
Table row “Rear”, column “R3”: 20

Uses in R3

Uses the code's use tables allow in R3, or allow with a permit. Each links to its page with the code section.

Not on this page

We did not find a general stories, lot size, lot coverage, FAR, density limit for R3 in the zoning tables we read. The code may still set one elsewhere — check the Calaveras County Municipal Code.

Other Calaveras County zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Calaveras County's R3 zone?

45 ft — Calaveras County Municipal Code § 17.05.030.

What is the minimum front setback in Calaveras County's R3 zone?

20 ft from property line or 50 ft from road centerline, whichever is greater — Calaveras County Municipal Code § 17.05.030.

What is the minimum side setback in Calaveras County's R3 zone?

10 ft — Calaveras County Municipal Code § 17.05.030.

What is the minimum rear setback in Calaveras County's R3 zone?

20 ft — Calaveras County Municipal Code § 17.05.030.

General information, not legal advice.

Ask about a Calaveras County property in R3

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Calaveras County