Skip to content

Compton · Zoning · R-A

Compton R-A zoning: height, setbacks and lot size

In Compton's R-A zone, buildings can be up to 35 ft tall, the front setback is 20 ft and the minimum lot size is 10,000 sq ft (Compton code, read October 2026).

Key points

  • Maximum building height: 35 ft
  • Minimum front setback: 20 ft
  • Minimum side setback: 3 ft (Interior side yard)
  • Minimum rear setback: 20 ft
  • Minimum lot size: 10,000 sq ft
  • Maximum density: 1 unit per 10,000 sq ft

R-A (Residential Agriculture Zone) is a zoning district in Compton. Every value below was read from the Compton Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in R-A

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
35 ft
§ 30-7.4 · code text
The maximum height for buildings or structures shall be 35 feet.
Minimum front setback
20 ft
§ 30-7.4 · code text
There shall be a front yard of not less than 20 feet.
Minimum side setback
3 ft
Applies: Interior side yard
§ 30-7.4 · code text
There shall be an interior side yard of not less than three feet.
Minimum rear setback
20 ft
§ 30-7.4 · code text
There shall be a rear yard of not less than 20 feet.
Minimum lot size
10,000 sq ft
§ 30-7.4 · code text
Each lot or parcel of land shall have a minimum of 10,000 square feet, a minimum street frontage width of 60 feet and a minimum depth of 150 feet.
Maximum density
1 unit per 10,000 sq ft
§ 30-7.4 · code text
The minimum lot area for each dwelling unit shall be 10,000 square feet.

When a different number applies

The code sets other values for particular lots, buildings or locations in R-A:

  • Minimum side setback: 5 ft — Street side yard § 30-7.4
  • Minimum side setback: 5 ft — Buildings and structures of two or more stories § 30-7.4
  • Minimum rear setback: 20% of lot depth, min 10 ft — Lot or parcel having a depth of 90 feet or less § 30-7.4

Not on this page

We did not find a general stories, lot coverage, FAR limit for R-A in the zoning tables we read. The code may still set one elsewhere — check the Compton Municipal Code.

Other Compton zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Compton's R-A zone?

35 ft — Compton Municipal Code § 30-7.4.

What is the minimum front setback in Compton's R-A zone?

20 ft — Compton Municipal Code § 30-7.4.

What is the minimum side setback in Compton's R-A zone?

3 ft (interior side yard) — Compton Municipal Code § 30-7.4.

What is the minimum rear setback in Compton's R-A zone?

20 ft — Compton Municipal Code § 30-7.4.

What is the minimum lot size in Compton's R-A zone?

10,000 sq ft — Compton Municipal Code § 30-7.4.

General information, not legal advice.

Ask about a Compton property in R-A

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Compton