Skip to content

Cypress · Zoning · CH

Cypress CH zoning: height, setbacks and lot size

In Cypress's CH zone, buildings can be up to No Maximum tall, the front setback is Average of abutting parcels; at least 6 ft and at most 10 ft and the minimum lot size is 10,000 sq ft (Cypress code, read October 2026).

Key points

  • Maximum building height: No Maximum
  • Minimum front setback: Average of abutting parcels; at least 6 ft and at most 10 ft
  • Minimum side setback: 0 ft
  • Minimum rear setback: 10 ft
  • Minimum lot size: 10,000 sq ft
  • Maximum lot coverage: No Maximum

CH is a zoning district in Cypress. Every value below was read from the Cypress Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in CH

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
No Maximum
§ 2.06.040 · code text
Table row “Maximum Structure Height”, column “CH”: No Maximum
Minimum front setback
Average of abutting parcels; at least 6 ft and at most 10 ft
§ 2.06.040 · code text
Table row “Front”, column “CH”: Average of abutting parcels; required minimum 6 feet, maximum 10 feet
Minimum side setback
0 ft
§ 2.06.040 · code text
Table row “Interior (each)”, column “CH”: 0 feet
Minimum rear setback
10 ft
§ 2.06.040 · code text
Table row “Rear”, column “CH”: 10 feet
Minimum lot size
10,000 sq ft
§ 2.06.040 · code text
Table row “Minimum Parcel Size”, column “CH”: 10,000 square feet
Maximum lot coverage
No Maximum
See note 1 below the table in the code.
§ 2.06.040 · code text
Table row “Maximum Parcel Coverage by Structures”, column “CH”: No Maximum (1)
Note 1: Landscaping shall be provided in compliance with Section 13 (Landscaping).

Uses in CH

Uses the code's use tables allow in CH, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in CH:

  • Minimum side setback: 20 ft — Abutting residential zoning district § 2.06.040

Not on this page

We did not find a general stories, FAR, density limit for CH in the zoning tables we read. The code may still set one elsewhere — check the Cypress Municipal Code.

Other Cypress zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Cypress's CH zone?

No Maximum — Cypress Municipal Code § 2.06.040.

What is the minimum front setback in Cypress's CH zone?

Average of abutting parcels; at least 6 ft and at most 10 ft — Cypress Municipal Code § 2.06.040.

What is the minimum side setback in Cypress's CH zone?

0 ft — Cypress Municipal Code § 2.06.040.

What is the minimum rear setback in Cypress's CH zone?

10 ft — Cypress Municipal Code § 2.06.040.

What is the minimum lot size in Cypress's CH zone?

10,000 sq ft — Cypress Municipal Code § 2.06.040.

General information, not legal advice.

Ask about a Cypress property in CH

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Cypress