Dana Point · Zoning · RMF 22
Dana Point RMF 22 zoning: height, setbacks and lot size
In Dana Point's RMF 22 zone, generally buildings can be up to 28 ft (2 stories) tall, the front setback is 20 ft and the minimum lot size is 4,800 sf, with the conditions listed below (Dana Point code, read October 2026).
Key points
- Maximum building height: 28 ft
- Maximum number of stories: 2 stories
- Minimum front setback: 20 ft (From ultimate public street ROW line)
- Minimum side setback: 10 ft (Interior side)
- Minimum rear setback: 20 ft (Standard lot)
- Minimum lot size: 4,800 sf (Applies to any proposed subdivision; not to existing lots without a subdivision or to condominiums and other common lot subdivisions)
- Maximum lot coverage: 60%
RMF 22 is a zoning district in Dana Point. Every value below was read from the Dana Point Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in RMF 22
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 28 ft See note 4 below the table in the code. § 9.09.030 · code textTable row “(f) Maximum Height:”, column “RMF 22”: 28 ft/(4) 2 stories Note 4: Subject to the measurement and design criteria in Section 9.05.110(a) . |
|---|---|
| Maximum number of stories | 2 stories See note 4 below the table in the code. § 9.09.030 · code textTable row “(f) Maximum Height:”, column “RMF 22”: 28 ft/(4) 2 stories Note 4: Subject to the measurement and design criteria in Section 9.05.110(a) . |
| Minimum front setback | 20 ft Applies: From ultimate public street ROW line See note 5 below the table in the code. § 9.09.030 · code textTable row “From Ultimate Public Street ROW line:”, column “RMF 22”: 20 ft Note 5: For existing lots less than 50 feet wide and/or less than 100 feet deep, see Section 9.05.190 for reduced front, side and rear building setbacks. |
| Minimum side setback | 10 ft Applies: Interior side See note 5 below the table in the code. § 9.09.030 · code textTable row “Interior Side:”, column “RMF 22”: 10 ft Note 5: For existing lots less than 50 feet wide and/or less than 100 feet deep, see Section 9.05.190 for reduced front, side and rear building setbacks. |
| Minimum rear setback | 20 ft Applies: Standard lot § 9.09.030 · code textTable row “Standard Lot:”, column “RMF 22”: 20 ft |
| Minimum lot size | 4,800 sf Applies: Applies to any proposed subdivision; not to existing lots without a subdivision or to condominiums and other common lot subdivisions § 9.09.030 · code textTable row “(a) Minimum Lot Size: (2)”, column “RMF 22”: 4,800 sf |
| Maximum lot coverage | 60% § 9.09.030 · code textTable row “(d) Maximum Lot Coverage:”, column “RMF 22”: 60% |
When a different number applies
The code sets other values for particular lots, buildings or locations in RMF 22:
- Minimum front setback: 15 ft — Flag lot, from connection with access extension § 9.09.030
- Minimum rear setback: 15 ft — Adjacent to an alley; subject to the garage setback standards in Section 9.35.040(e) § 9.09.030
Not on this page
We did not find a general FAR, density limit for RMF 22 in the zoning tables we read. The code may still set one elsewhere — check the Dana Point Municipal Code.
Other Dana Point zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Dana Point's RMF 22 zone?
28 ft — Dana Point Municipal Code § 9.09.030.
What is the maximum number of stories in Dana Point's RMF 22 zone?
2 stories — Dana Point Municipal Code § 9.09.030.
What is the minimum front setback in Dana Point's RMF 22 zone?
20 ft (from ultimate public street ROW line) — Dana Point Municipal Code § 9.09.030.
What is the minimum side setback in Dana Point's RMF 22 zone?
10 ft (interior side) — Dana Point Municipal Code § 9.09.030.
What is the minimum rear setback in Dana Point's RMF 22 zone?
20 ft (standard lot) — Dana Point Municipal Code § 9.09.030.
General information, not legal advice.
Ask about a Dana Point property in RMF 22
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question