Skip to content

Eastvale · Zoning · I-P

Eastvale I-P zoning: height, setbacks and lot size

In Eastvale's I-P zone, generally buildings can be up to 35 ft tall and the minimum lot size is 20,000 sq ft, with the conditions listed below (Eastvale code, read October 2026).

Key points

  • Maximum building height: 35 ft (At the setback line; parts above 35 ft step back 2 ft per 1 ft, up to 50 ft overall)
  • Minimum side setback: 10 ft (10 ft for the two sides combined (note 5))
  • Minimum rear setback: 15 ft
  • Minimum lot size: 20,000 sq ft

I-P is a zoning district in Eastvale. Every value below was read from the Eastvale Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in I-P

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
35 ft
Applies: At the setback line; parts above 35 ft step back 2 ft per 1 ft, up to 50 ft overall
§ 120.03.030 · code text
Table row “Primary building”, column “I-P”: 35 ft 6
Minimum side setback
10 ft
Applies: 10 ft for the two sides combined (note 5)
§ 120.03.030 · code text
Table row “Side, interior”, column “I-P”: 10 ft 5
Minimum rear setback
15 ft
§ 120.03.030 · code text
Table row “Rear”, column “I-P”: 15 ft
Minimum lot size
20,000 sq ft
§ 120.03.030 · code text
Table row “Minimum lot size”, column “I-P”: 20,000 sf

Uses in I-P

Uses the code's use tables allow in I-P, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in I-P:

  • Maximum building height: 50 ft — All buildings and structures; unless a height up to 75 feet for buildings, or 105 feet for other structures, is specifically permitted under this title § 120.03.030
  • Maximum building height: 75 ft — For buildings, where specifically permitted under this title; 105 ft for other structures § 120.03.030
  • Maximum building height: 75 ft — When granted under section 120.05.010 (height exemptions) § 120.03.030
  • Minimum front setback: 50 ft — Where the industrial property abuts a residential or commercially zoned property § 120.03.030

Not on this page

We did not find a general stories, front setback, lot coverage, FAR, density limit for I-P in the zoning tables we read. The code may still set one elsewhere — check the Eastvale Municipal Code.

Other Eastvale zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Eastvale's I-P zone?

35 ft (at the setback line; parts above 35 ft step back 2 ft per 1 ft, up to 50 ft overall) — Eastvale Municipal Code § 120.03.030.

What is the minimum side setback in Eastvale's I-P zone?

10 ft (10 ft for the two sides combined (note 5)) — Eastvale Municipal Code § 120.03.030.

What is the minimum rear setback in Eastvale's I-P zone?

15 ft — Eastvale Municipal Code § 120.03.030.

What is the minimum lot size in Eastvale's I-P zone?

20,000 sq ft — Eastvale Municipal Code § 120.03.030.

General information, not legal advice.

Ask about an Eastvale property in I-P

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Eastvale