Healdsburg · Zoning · PR
Healdsburg PR zoning: height, setbacks and lot size
In Healdsburg's PR zone, generally buildings can be up to 50 ft tall, the front setback is None required and the minimum lot size is No minimum, with the conditions listed below (Healdsburg code, read October 2026).
Key points
- Maximum building height: 50 ft (Sites that do not abut or face an R-1 or multi-family zone; less near those zones)
- Minimum front setback: None required
- Minimum side setback: None required (Interior side yard)
- Minimum rear setback: None required
- Minimum lot size: No minimum
- Maximum lot coverage: 100%
- Maximum floor area ratio (FAR): 300%
- Maximum density: 1 unit per 2,700 sq ft (Residential dwellings on commercially zoned property; density bonuses can change this)
PR is a zoning district in Healdsburg. Every value below was read from the Healdsburg Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in PR
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 50 ft Applies: Sites that do not abut or face an R-1 or multi-family zone; less near those zones § 20.08.170 · code textFifty feet in all other instances. |
|---|---|
| Minimum front setback | None required § 20.08.160 · code textTable row “PR”, column “Front”: none |
| Minimum side setback | None required Applies: Interior side yard § 20.08.160 · code textTable row “PR”, column “Side Yard Interior”: none |
| Minimum rear setback | None required § 20.08.160 · code textTable row “PR”, column “Rear”: none |
| Minimum lot size | No minimum § 20.08.160 · code textTable row “PR”, column “Minimum Lot Area”: none |
| Maximum lot coverage | 100% § 20.08.165 · code textTable row “PR”, column “Max. Site Coverage”: 100% |
| Maximum floor area ratio (FAR) | 300% § 20.08.165 · code textTable row “PR”, column “Max. Floor Area Ratio (FAR)”: 300% |
| Maximum density | 1 unit per 2,700 sq ft Applies: Residential dwellings on commercially zoned property; density bonuses can change this § 20.08.175 · code textSite area per dwelling: 2,700 square feet, except where density bonuses apply as provided in HMC § 20.20.035. |
When a different number applies
The code sets other values for particular lots, buildings or locations in PR:
- Maximum building height: 35 ft — When a site abuts or is directly across a street or an alley from a site zoned R-1. § 20.08.170
- Maximum building height: 40 ft — When a site abuts or is directly across a street or an alley from any zone that allows multi-family housing as a primary use, including RM, ORM, RMP and DR. § 20.08.170
Not on this page
We did not find a general stories limit for PR in the zoning tables we read. The code may still set one elsewhere — check the Healdsburg Municipal Code.
Other Healdsburg zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Healdsburg's PR zone?
50 ft (sites that do not abut or face an R-1 or multi-family zone; less near those zones) — Healdsburg Municipal Code § 20.08.170.
What is the minimum front setback in Healdsburg's PR zone?
None required — Healdsburg Municipal Code § 20.08.160.
What is the minimum side setback in Healdsburg's PR zone?
None required (interior side yard) — Healdsburg Municipal Code § 20.08.160.
What is the minimum rear setback in Healdsburg's PR zone?
None required — Healdsburg Municipal Code § 20.08.160.
What is the minimum lot size in Healdsburg's PR zone?
No minimum — Healdsburg Municipal Code § 20.08.160.
General information, not legal advice.
Ask about a Healdsburg property in PR
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question