Skip to content

Lafayette · Zoning · R-6

Lafayette R-6 zoning: height, setbacks and lot size

In Lafayette's R-6 zone, the front setback is 20 ft and the minimum lot size is 6,000 sq ft (Lafayette code, read October 2026).

Key points

  • Minimum front setback: 20 ft
  • Minimum side setback: 5 ft (Each side; at least 15 ft combined on both sides.)
  • Minimum rear setback: 15 ft (principal structure)
  • Minimum lot size: 6,000 sq ft

R-6 (Single-Family Residential District-6) is a zoning district in Lafayette. Every value below was read from the Lafayette Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in R-6

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Minimum front setback
20 ft
§ 6-710 · code text
There shall be a setback (front yard) of at least 20 feet for any structure in the R-6 district; on corner lots the principal frontage shall have a setback of at least 20 feet and the other setback shall be at least 15 feet.
Minimum side setback
5 ft
Applies: Each side; at least 15 ft combined on both sides.
§ 6-709 · code text
There shall be an aggregate side yard width of at least 15 feet for any structure in the R-6 district. No side yard shall be less than five feet wide.
Minimum rear setback
15 ft
Applies: principal structure
§ 6-711 · code text
There shall be a rear yard, for any principal structure in the R-6 district, of at least 15 feet. There shall be a rear yard for accessory structures of at least three feet.
Minimum lot size
6,000 sq ft
§ 6-705 · code text
No single-family dwelling or other structure permitted in the R-6 district shall be erected or placed on a lot smaller than 6,000 square feet in area.

When a different number applies

The code sets other values for particular lots, buildings or locations in R-6:

  • Minimum front setback: 15 ft — corner lot, other setback § 6-710

Not on this page

We did not find a general height, stories, lot coverage, FAR, density limit for R-6 in the zoning tables we read. The code may still set one elsewhere — check the Lafayette Municipal Code.

Other Lafayette zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the minimum front setback in Lafayette's R-6 zone?

20 ft — Lafayette Municipal Code § 6-710.

What is the minimum side setback in Lafayette's R-6 zone?

5 ft (each side; at least 15 ft combined on both sides) — Lafayette Municipal Code § 6-709.

What is the minimum rear setback in Lafayette's R-6 zone?

15 ft (principal structure) — Lafayette Municipal Code § 6-711.

What is the minimum lot size in Lafayette's R-6 zone?

6,000 sq ft — Lafayette Municipal Code § 6-705.

General information, not legal advice.

Ask about a Lafayette property in R-6

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Lafayette