Laguna Woods · Zoning · NC
Laguna Woods NC zoning: height, setbacks and lot size
In Laguna Woods's NC zone, generally buildings can be up to 35 ft tall, the front setback is 20 ft and the minimum lot size is none required, with the conditions listed below (Laguna Woods code, read October 2026).
Key points
- Maximum building height: 35 ft
- Minimum front setback: 20 ft (From Street ROW)
- Minimum side setback: 0 ft (From Nonresidential Districts)
- Minimum lot size: none required
- Maximum lot coverage: 35% (does not apply to housing as a principal use in the residential overlay zoning districts)
- Maximum floor area ratio (FAR): 0.30 (does not apply to housing as a principal use in the residential overlay zoning districts)
NC is a zoning district in Laguna Woods. Every value below was read from the Laguna Woods Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in NC
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 35 ft § 13.10.030 · code textTable row “Maximum Building Height (ft.)”, column “NC”: 35 |
|---|---|
| Minimum front setback | 20 ft Applies: From Street ROW § 13.10.030 · code textTable row “From Street ROW”, column “NC”: 20 |
| Minimum side setback | 0 ft Applies: From Nonresidential Districts § 13.10.030 · code textTable row “From Nonresidential Districts”, column “NC”: 0 |
| Minimum lot size | none required § 13.10.030 · code textTable row “Minimum Building Site Area (sq. ft.)”, column “NC”: none |
| Maximum lot coverage | 35% Applies: does not apply to housing as a principal use in the residential overlay zoning districts § 13.10.030 · code textTable row “Maximum Building Site Coverage 2”, column “NC”: 35 percent |
| Maximum floor area ratio (FAR) | 0.30 Applies: does not apply to housing as a principal use in the residential overlay zoning districts § 13.10.030 · code textTable row “Maximum FAR”, column “NC”: 0.30 |
Uses in NC
Uses the code's use tables allow in NC, or allow with a permit. Each links to its page with the code section.
- Church or place of worship — Needs an use permit
When a different number applies
The code sets other values for particular lots, buildings or locations in NC:
- Minimum side setback: 20 ft — From Residential Districts § 13.10.030
- Minimum rear setback: 20 ft — From Alley § 13.10.030
Not on this page
We did not find a general stories, rear setback, density limit for NC in the zoning tables we read. The code may still set one elsewhere — check the Laguna Woods Municipal Code.
Other Laguna Woods zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Laguna Woods's NC zone?
35 ft — Laguna Woods Municipal Code § 13.10.030.
What is the minimum front setback in Laguna Woods's NC zone?
20 ft (from Street ROW) — Laguna Woods Municipal Code § 13.10.030.
What is the minimum side setback in Laguna Woods's NC zone?
0 ft (from Nonresidential Districts) — Laguna Woods Municipal Code § 13.10.030.
What is the minimum lot size in Laguna Woods's NC zone?
none required — Laguna Woods Municipal Code § 13.10.030.
What is the maximum lot coverage in Laguna Woods's NC zone?
35% (does not apply to housing as a principal use in the residential overlay zoning districts) — Laguna Woods Municipal Code § 13.10.030.
General information, not legal advice.
Ask about a Laguna Woods property in NC
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question