Skip to content

Lake County · Zoning · SR

Lake County SR zoning: height, setbacks and lot size

In Lake County's SR zone, generally buildings can be up to 35 ft tall, the front setback is 30 ft from lot line or 55 ft from centerline of roadway, whichever is greater and the minimum lot size is 40,000 sq ft, with the conditions listed below (Lake County code, read October 2026).

Key points

  • Maximum building height: 35 ft (Principal structure)
  • Minimum front setback: 30 ft from lot line or 55 ft from centerline of roadway, whichever is greater
  • Minimum side setback: 5 ft
  • Minimum rear setback: 20 ft
  • Minimum lot size: 40,000 sq ft
  • Maximum density: 40,000 sq ft per dwelling unit

SR (SUBURBAN RESERVE) is a zoning district in Lake County. Every value below was read from the Lake County Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in SR

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
35 ft
Applies: Principal structure
§ 9.15 · code text
Principal structure: Thirty-five (35) feet.
Minimum front setback
30 ft from lot line or 55 ft from centerline of roadway, whichever is greater
§ 9.14 · code text
Front yard: Thirty (30) feet from lot line or fifty-five (55) feet from centerline of roadway, whichever is greater. Yards abutting streets are front yards.
Minimum side setback
5 ft
§ 9.14 · code text
Side yard: Five (5) feet from lot line.
Minimum rear setback
20 ft
§ 9.14 · code text
Rear yard: Twenty (20) feet from lot line.
Minimum lot size
40,000 sq ft
§ 9.11 · code text
Minimum lot size: Forty thousand (40,000) square feet.
Maximum density
40,000 sq ft per dwelling unit
§ 9.11 · code text
Maximum permitted density: Forty thousand (40,000) square feet per dwelling unit.

Not on this page

We did not find a general stories, lot coverage, FAR limit for SR in the zoning tables we read. The code may still set one elsewhere — check the Lake County Municipal Code.

Other Lake County zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Lake County's SR zone?

35 ft (principal structure) — Lake County Municipal Code § 9.15.

What is the minimum front setback in Lake County's SR zone?

30 ft from lot line or 55 ft from centerline of roadway, whichever is greater — Lake County Municipal Code § 9.14.

What is the minimum side setback in Lake County's SR zone?

5 ft — Lake County Municipal Code § 9.14.

What is the minimum rear setback in Lake County's SR zone?

20 ft — Lake County Municipal Code § 9.14.

What is the minimum lot size in Lake County's SR zone?

40,000 sq ft — Lake County Municipal Code § 9.11.

General information, not legal advice.

Ask about a Lake County property in SR

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Lake County