Lake Elsinore · Zoning · L
Lake Elsinore L zoning: height, setbacks and lot size
In Lake Elsinore's L zone, generally buildings can be up to 30 ft tall, the front setback is 20 ft and the minimum lot size is 6,000 sq ft, with the conditions listed below (Lake Elsinore code, read October 2026).
Key points
- Maximum building height: 30 ft
- Minimum front setback: 20 ft (from Lakeshore Drive)
- Minimum side setback: 5 ft
- Minimum lot size: 6,000 sq ft (new subdivision)
- Maximum lot coverage: 50% (custom single-family homes; calculated on the area of the property remaining above the ordinary high water mark; maximum of all structures)
- Maximum density: 1 dwelling unit per 10,000 sq ft (new subdivision)
L (Lakeshore Zoning District) is a zoning district in Lake Elsinore. Every value below was read from the Lake Elsinore Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in L
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 30 ft § 17.20.080 · code textExcept as otherwise provided by LEMC § 17.20.050, building height shall be a maximum of 30 feet. |
|---|---|
| Minimum front setback | 20 ft Applies: from Lakeshore Drive § 17.20.080 · code textAll uses shall maintain a minimum setback of 20 feet from Lakeshore Drive. |
| Minimum side setback | 5 ft § 17.20.080 · code textSide yard setback shall be five feet. |
| Minimum lot size | 6,000 sq ft Applies: new subdivision § 17.20.080 · code textAny new subdivision of property shall provide a minimum 6,000-square-foot lot area. |
| Maximum lot coverage | 50% Applies: custom single-family homes; calculated on the area of the property remaining above the ordinary high water mark; maximum of all structures § 17.20.083 · code textLot coverage shall be calculated on the area of the property remaining above the "ordinary high water mark," and the maximum of all structures shall be 50 percent. |
| Maximum density | 1 dwelling unit per 10,000 sq ft Applies: new subdivision § 17.20.080 · code textResidential densities for new subdivisions shall not exceed one dwelling unit per 10,000 square feet. |
Not on this page
We did not find a general stories, rear setback, FAR limit for L in the zoning tables we read. The code may still set one elsewhere — check the Lake Elsinore Municipal Code.
Other Lake Elsinore zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Lake Elsinore's L zone?
30 ft — Lake Elsinore Municipal Code § 17.20.080.
What is the minimum front setback in Lake Elsinore's L zone?
20 ft (from Lakeshore Drive) — Lake Elsinore Municipal Code § 17.20.080.
What is the minimum side setback in Lake Elsinore's L zone?
5 ft — Lake Elsinore Municipal Code § 17.20.080.
What is the minimum lot size in Lake Elsinore's L zone?
6,000 sq ft (new subdivision) — Lake Elsinore Municipal Code § 17.20.080.
What is the maximum lot coverage in Lake Elsinore's L zone?
50% (custom single-family homes; calculated on the area of the property remaining above the ordinary high water mark; maximum of all structures) — Lake Elsinore Municipal Code § 17.20.083.
General information, not legal advice.
Ask about a Lake Elsinore property in L
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question