Skip to content

Lodi · Zoning · BP

Lodi BP zoning: height, setbacks and lot size

In Lodi's BP zone, generally buildings can be up to 70 ft tall, the front setback is 25 ft and the minimum lot size is 1 acre, with the conditions listed below (Lodi code, read October 2026).

Key points

  • Maximum building height: 70 ft
  • Minimum front setback: 25 ft
  • Minimum side setback: None required
  • Minimum rear setback: None required
  • Minimum lot size: 1 acre (Minimum area for new parcels)
  • Maximum floor area ratio (FAR): 1.0

BP is a zoning district in Lodi. Every value below was read from the Lodi Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in BP

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
70 ft
See note 2 below the table in the code.
§ 17.24.040 · code text
Table row “Height limit”, column “BP”: 70 ft. (2)
Note 2: Additional height is allowed by use permit.
Minimum front setback
25 ft
§ 17.24.040 · code text
Table row “Front”, column “BP”: 25 ft
Minimum side setback
None required
See note 1 below the table in the code.
§ 17.24.040 · code text
Table row “Sides (each)”, column “BP”: None (1)
Note 1: None required except: When adjacent to a res. zone boundary where a min. of twenty feet is required.
Minimum rear setback
None required
See note 1 below the table in the code.
§ 17.24.040 · code text
Table row “Rear”, column “BP”: None (1)
Note 1: None required except: When adjacent to a res. zone boundary where a min. of twenty feet is required.
Minimum lot size
1 acre
Applies: Minimum area for new parcels
§ 17.24.040 · code text
Table row “Area”, column “BP”: 1 acre
Maximum floor area ratio (FAR)
1.0
§ 17.24.040 · code text
Table row “Floor area ratio (FAR)”, column “BP”: 1.0

Not on this page

We did not find a general stories, lot coverage, density limit for BP in the zoning tables we read. The code may still set one elsewhere — check the Lodi Municipal Code.

Other Lodi zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Lodi's BP zone?

70 ft — Lodi Municipal Code § 17.24.040.

What is the minimum front setback in Lodi's BP zone?

25 ft — Lodi Municipal Code § 17.24.040.

What is the minimum side setback in Lodi's BP zone?

None required — Lodi Municipal Code § 17.24.040.

What is the minimum rear setback in Lodi's BP zone?

None required — Lodi Municipal Code § 17.24.040.

What is the minimum lot size in Lodi's BP zone?

1 acre (minimum area for new parcels) — Lodi Municipal Code § 17.24.040.

General information, not legal advice.

Ask about a Lodi property in BP

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Lodi