Loomis · Building on your lot
Grading and erosion control in Loomis
Loomis's own rules on grading and erosion control, with the code text for every value.
Each rule below links to the section of the Loomis Municipal Code it was read from, with the code text one click away (checked October 2026). General information, not legal advice.
What Loomis's code says
| Steepest cut or fill slope |
|
|---|---|
| Grading without a permit |
|
Who this affects
Frequently asked questions
What are the grading rules in Loomis?
Loomis's code: No permit if all met: under 50 cubic yards, depth 3 feet or less, 2:1 slope or less, drainage unchanged. (Excavations or fills. Work must not endanger adjacent property, increase erosion, sedimentation or runoff, impair a watercourse's flow, or cause a public nuisance.) (§ 12.04.050); No steeper than 2 horizontal to 1 vertical. (Permanent excavation cut surfaces; steeper is allowed in competent bedrock if the geotechnical or geological report recommends it.) (§ 12.04.450).
General information, not legal advice.
Ask about a specific Loomis property
Ask GoCodebook how Loomis's grading and erosion control rules apply to your situation and get an answer that cites the section.
Ask your question