Skip to content

Napa · Zoning · IP-C

Napa IP-C zoning: height, setbacks and lot size

In Napa's IP-C zone, generally buildings can be up to 30 ft tall, the front setback is 20 ft and the minimum lot size is 1 acre, with the conditions listed below (Napa code, read October 2026).

Key points

  • Maximum building height: 30 ft
  • Minimum front setback: 20 ft (local street)
  • Minimum side setback: 10 ft (add 1 ft of yard for each foot the building is taller than 20 ft)
  • Minimum rear setback: 10 ft (add 1 ft of yard for each foot the building is taller than 20 ft)
  • Minimum lot size: 1 acre

IP-C is a zoning district in Napa. Every value below was read from the Napa Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in IP-C

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
30 ft
§ 17.14.030 · code text
Table row “Height—stories/height in feet whichever is more restrictive”, column “IP-C”: 30
Minimum front setback
20 ft
Applies: local street
§ 17.14.030 · code text
Table row “Local Street”, column “IP-C”: 20**
Minimum side setback
10 ft
Applies: add 1 ft of yard for each foot the building is taller than 20 ft
§ 17.14.030 · code text
Table row “Side Yard (feet)”, column “IP-C”: 10*
Minimum rear setback
10 ft
Applies: add 1 ft of yard for each foot the building is taller than 20 ft
§ 17.14.030 · code text
Table row “Rear Yard (feet)”, column “IP-C”: 10*
Minimum lot size
1 acre
§ 17.14.030 · code text
Table row “Minimum Lot Area (sq. ft.)”, column “IP-C”: 1 Acre

Uses in IP-C

Uses the code's use tables allow in IP-C, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in IP-C:

  • Maximum building height: 35 ft — pitched or gable roofs with design review § 17.14.030
  • Minimum front setback: 35 ft — arterial or collector § 17.14.030

Not on this page

We did not find a general stories, lot coverage, FAR, density limit for IP-C in the zoning tables we read. The code may still set one elsewhere — check the Napa Municipal Code.

Other Napa zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Napa's IP-C zone?

30 ft — Napa Municipal Code § 17.14.030.

What is the minimum front setback in Napa's IP-C zone?

20 ft (local street) — Napa Municipal Code § 17.14.030.

What is the minimum side setback in Napa's IP-C zone?

10 ft (add 1 ft of yard for each foot the building is taller than 20 ft) — Napa Municipal Code § 17.14.030.

What is the minimum rear setback in Napa's IP-C zone?

10 ft (add 1 ft of yard for each foot the building is taller than 20 ft) — Napa Municipal Code § 17.14.030.

What is the minimum lot size in Napa's IP-C zone?

1 acre — Napa Municipal Code § 17.14.030.

General information, not legal advice.

Ask about a Napa property in IP-C

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Napa