Skip to content

Pinole · Zoning · R-2

Pinole R-2 zoning: height, setbacks and lot size

In Pinole's R-2 zone, buildings can be up to 35 ft tall and the front setback is 0 ft (Pinole code, read October 2026).

Key points

  • Maximum building height: 35 ft
  • Minimum front setback: 0 ft
  • Minimum side setback: 5 ft
  • Minimum rear setback: 15 ft
  • Maximum density: 20.0 units per acre

R-2 (Medium Density Zoning District) is a zoning district in Pinole. Every value below was read from the Pinole Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in R-2

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
35 ft
§ 17.24.020 · code text
Table row “Primary Buildings”, column “R-2”: 35
Minimum front setback
0 ft
§ 17.24.020 · code text
Table row “Front Yard”, column “R-2”: 0
Minimum side setback
5 ft
§ 17.24.020 · code text
Table row “Side Yard”, column “R-2”: 5
Minimum rear setback
15 ft
§ 17.24.020 · code text
Table row “Rear Yard”, column “R-2”: 15
Maximum density
20.0 units per acre
§ 17.24.020 · code text
Table row “Maximum Density”, column “R-2”: 20.0

Uses in R-2

Uses the code's use tables allow in R-2, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in R-2:

  • Minimum side setback: 10 ft — For a second story § 17.24.020

Not on this page

We did not find a general stories, lot size, lot coverage, FAR limit for R-2 in the zoning tables we read. The code may still set one elsewhere — check the Pinole Municipal Code.

Other Pinole zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Pinole's R-2 zone?

35 ft — Pinole Municipal Code § 17.24.020.

What is the minimum front setback in Pinole's R-2 zone?

0 ft — Pinole Municipal Code § 17.24.020.

What is the minimum side setback in Pinole's R-2 zone?

5 ft — Pinole Municipal Code § 17.24.020.

What is the minimum rear setback in Pinole's R-2 zone?

15 ft — Pinole Municipal Code § 17.24.020.

What is the maximum density in Pinole's R-2 zone?

20.0 units per acre — Pinole Municipal Code § 17.24.020.

General information, not legal advice.

Ask about a Pinole property in R-2

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Pinole