Richmond · Zoning · CM-2
Richmond CM-2 zoning: height, setbacks and lot size
In Richmond's CM-2 zone, generally buildings can be up to 45 ft (4 stories) tall, the front setback is 0 to 10 ft and the minimum lot size is 5,000 sq. ft., with the conditions listed below (Richmond code, read October 2026).
Key points
- Maximum building height: 45 ft
- Maximum number of stories: 4 stories
- Minimum front setback: 0 to 10 ft (build-to line: the building must stand within this distance; commercial and mixed-use development (housing-only follows RM2))
- Minimum side setback: 0 ft (Commercial and mixed-use development; housing-only projects follow the RM2 setbacks)
- Minimum rear setback: 5 ft (Commercial and mixed-use development; housing-only projects follow the RM2 setbacks)
- Minimum lot size: 5,000 sq. ft.
- Maximum floor area ratio (FAR): 0.5 (Applies to non-residential floor area only)
- Maximum density: 30 units per net acre
CM-2 is a zoning district in Richmond. Every value below was read from the Richmond Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in CM-2
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 45 ft § 15.04.202.030 · code textTable row “Building Maximum Height (ft.)”, column “CM-2”: 45; 35 within 30 feet of a Residential District |
|---|---|
| Maximum number of stories | 4 stories § 15.04.202.030 · code textTable row “Maximum Stories”, column “CM-2”: 4 |
| Minimum front setback | 0 to 10 ft Applies: build-to line: the building must stand within this distance; commercial and mixed-use development (housing-only follows RM2) § 15.04.202.030 · code textTable row “Street Frontages (A)”, column “CM-2”: Min. 0; Max. 10 |
| Minimum side setback | 0 ft Applies: Commercial and mixed-use development; housing-only projects follow the RM2 setbacks § 15.04.202.030 · code textTable row “Interior Side (B)”, column “CM-2”: Min. 0; 5 where abutting a Residential District |
| Minimum rear setback | 5 ft Applies: Commercial and mixed-use development; housing-only projects follow the RM2 setbacks § 15.04.202.030 · code textTable row “Rear (B)”, column “CM-2”: Min. 5; 10 where abutting Residential District |
| Minimum lot size | 5,000 sq. ft. § 15.04.202.030 · code textTable row “Minimum Lot Size (sq. ft.)”, column “CM-2”: 5,000 |
| Maximum floor area ratio (FAR) | 0.5 Applies: Applies to non-residential floor area only § 15.04.202.030 · code textTable row “Maximum Non-Residential Floor Area Ratio (FAR)”, column “CM-2”: 0.5 |
| Maximum density | 30 units per net acre § 15.04.202.030 · code textTable row “Minimum; Maximum Density (units/net acre)”, column “CM-2”: 10; 30 |
Uses in CM-2
Uses the code's use tables allow in CM-2, or allow with a permit. Each links to its page with the code section.
- Apartment building — Allowed — see note
- Child care center — Needs an administrative use permit
- Community garden — Allowed
When a different number applies
The code sets other values for particular lots, buildings or locations in CM-2:
- Maximum building height: 35 ft — within 30 feet of a Residential District § 15.04.202.030
- Minimum side setback: 5 ft — where abutting a Residential District § 15.04.202.030
- Minimum rear setback: 10 ft — where abutting Residential District § 15.04.202.030
Not on this page
We did not find a general lot coverage limit for CM-2 in the zoning tables we read. The code may still set one elsewhere — check the Richmond Municipal Code.
Other Richmond zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Richmond's CM-2 zone?
45 ft — Richmond Municipal Code § 15.04.202.030.
What is the maximum number of stories in Richmond's CM-2 zone?
4 stories — Richmond Municipal Code § 15.04.202.030.
What is the minimum front setback in Richmond's CM-2 zone?
0 to 10 ft (build-to line: the building must stand within this distance; commercial and mixed-use development (housing-only follows RM2)) — Richmond Municipal Code § 15.04.202.030.
What is the minimum side setback in Richmond's CM-2 zone?
0 ft (commercial and mixed-use development; housing-only projects follow the RM2 setbacks) — Richmond Municipal Code § 15.04.202.030.
What is the minimum rear setback in Richmond's CM-2 zone?
5 ft (commercial and mixed-use development; housing-only projects follow the RM2 setbacks) — Richmond Municipal Code § 15.04.202.030.
General information, not legal advice.
Ask about a Richmond property in CM-2
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question