Rio Vista · Zoning · I-P-I
Rio Vista I-P-I zoning: height, setbacks and lot size
In Rio Vista's I-P-I zone, buildings can be up to 50 feet tall, the front setback is 25 feet and the minimum lot size is 1/2 acre (Rio Vista code, read October 2026).
Key points
- Maximum building height: 50 feet
- Minimum front setback: 25 feet
- Minimum side setback: 20 feet
- Minimum rear setback: 20 feet
- Minimum lot size: 1/2 acre
I-P-I (Industrial Park and/or Industrial District) is a zoning district in Rio Vista. Every value below was read from the Rio Vista Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in I-P-I
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 50 feet § 17.28.060 · code textMaximum building height: 50 feet. |
|---|---|
| Minimum front setback | 25 feet § 17.28.080 · code textA. Front yard: 25 feet. |
| Minimum side setback | 20 feet § 17.28.080 · code textB. Side yard: 20 feet, each side. |
| Minimum rear setback | 20 feet § 17.28.080 · code textC. Rear yard: 20 feet. |
| Minimum lot size | 1/2 acre § 17.28.050 · code textMinimum lot area: 1/2 acre. |
Not on this page
We did not find a general stories, lot coverage, FAR, density limit for I-P-I in the zoning tables we read. The code may still set one elsewhere — check the Rio Vista Municipal Code.
Other Rio Vista zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Rio Vista's I-P-I zone?
50 feet — Rio Vista Municipal Code § 17.28.060.
What is the minimum front setback in Rio Vista's I-P-I zone?
25 feet — Rio Vista Municipal Code § 17.28.080.
What is the minimum side setback in Rio Vista's I-P-I zone?
20 feet — Rio Vista Municipal Code § 17.28.080.
What is the minimum rear setback in Rio Vista's I-P-I zone?
20 feet — Rio Vista Municipal Code § 17.28.080.
What is the minimum lot size in Rio Vista's I-P-I zone?
1/2 acre — Rio Vista Municipal Code § 17.28.050.
General information, not legal advice.
Ask about a Rio Vista property in I-P-I
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question