San Bernardino · Zoning · CR-2
San Bernardino CR-2 zoning: height, setbacks and lot size
In San Bernardino's CR-2 zone, generally the front setback is 0 ft and the minimum lot size is 0 sq ft, with the conditions listed below (San Bernardino code, read October 2026).
Key points
- Minimum front setback: 0 ft
- Minimum side setback: 0 ft
- Minimum rear setback: 0 ft
- Minimum lot size: 0 sq ft (only required for new commercial and industrial subdivisions)
- Maximum lot coverage: 100%
CR-2 is a zoning district in San Bernardino. Every value below was read from the San Bernardino Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in CR-2
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Minimum front setback | 0 ft § 19.06.030 · code textTable row “Front Setback”, column “CR-2”: 0 |
|---|---|
| Minimum side setback | 0 ft § 19.06.030 · code textTable row “Side Setback (Each)”, column “CR-2”: 0 |
| Minimum rear setback | 0 ft § 19.06.030 · code textTable row “Rear Setback”, column “CR-2”: 0 |
| Minimum lot size | 0 sq ft Applies: only required for new commercial and industrial subdivisions § 19.06.030 · code textTable row “Net Lot Area1”, column “CR-2”: 0 |
| Maximum lot coverage | 100% § 19.06.030 · code textTable row “Lot Coverage (Maximum %)”, column “CR-2”: 100 |
Not on this page
We did not find a general height, stories, FAR, density limit for CR-2 in the zoning tables we read. The code may still set one elsewhere — check the San Bernardino Municipal Code.
Other San Bernardino zoning districts
Who this affects
Frequently asked questions
What is the minimum front setback in San Bernardino's CR-2 zone?
0 ft — San Bernardino Municipal Code § 19.06.030.
What is the minimum side setback in San Bernardino's CR-2 zone?
0 ft — San Bernardino Municipal Code § 19.06.030.
What is the minimum rear setback in San Bernardino's CR-2 zone?
0 ft — San Bernardino Municipal Code § 19.06.030.
What is the minimum lot size in San Bernardino's CR-2 zone?
0 sq ft (only required for new commercial and industrial subdivisions) — San Bernardino Municipal Code § 19.06.030.
What is the maximum lot coverage in San Bernardino's CR-2 zone?
100% — San Bernardino Municipal Code § 19.06.030.
General information, not legal advice.
Ask about a San Bernardino property in CR-2
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question