Skip to content

San Jose · Zoning · CP

San Jose CP zoning: height, setbacks and lot size

In San Jose's CP zone, generally buildings can be up to 50 ft tall, the front setback is No minimum, 10 ft maximum and the minimum lot size is 6,000 sq ft, with the conditions listed below (San Jose code, read October 2026).

Key points

  • Maximum building height: 50 ft (unless Chapter 20.85 or an approved Urban Village Plan sets a different maximum)
  • Minimum front setback: No minimum, 10 ft maximum (build-to line: the building must stand within this distance; unless an approved Urban Village Plan sets a different figure)
  • Minimum rear setback: 25 ft (unless an approved Urban Village Plan sets a different figure)
  • Minimum lot size: 6,000 sq ft (unless an approved Urban Village Plan sets a different figure)

CP is a zoning district in San Jose. Every value below was read from the San Jose Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in CP

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
50 ft
Applies: unless Chapter 20.85 or an approved Urban Village Plan sets a different maximum
§ 20.40.200 · code text
Table row “Maximum height (feet) (Note 1 and 3)”, column “CP”: 50, unless a different maximum is established in Chapter 20.85 ; or as established in approved Urban Village Plan
Minimum front setback
No minimum, 10 ft maximum
Applies: build-to line: the building must stand within this distance; unless an approved Urban Village Plan sets a different figure
§ 20.40.200 · code text
Table row “Front”, column “CP”: no minimum, 10 feet maximum; or as established in approved Urban Village Plan
Minimum rear setback
25 ft
Applies: unless an approved Urban Village Plan sets a different figure
§ 20.40.200 · code text
Table row “Rear, interior”, column “CP”: 25; or as established in approved Urban Village Plan
Minimum lot size
6,000 sq ft
Applies: unless an approved Urban Village Plan sets a different figure
§ 20.40.200 · code text
Table row “Minimum lot area (square feet or acreage)”, column “CP”: 6,000; or as established in approved Urban Village Plan

Uses in CP

Uses the code's use tables allow in CP, or allow with a permit. Each links to its page with the code section.

Not on this page

We did not find a general stories, side setback, lot coverage, FAR, density limit for CP in the zoning tables we read. The code may still set one elsewhere — check the San Jose Municipal Code.

Other San Jose zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in San Jose's CP zone?

50 ft (unless Chapter 20.85 or an approved Urban Village Plan sets a different maximum) — San Jose Municipal Code § 20.40.200.

What is the minimum front setback in San Jose's CP zone?

No minimum, 10 ft maximum (build-to line: the building must stand within this distance; unless an approved Urban Village Plan sets a different figure) — San Jose Municipal Code § 20.40.200.

What is the minimum rear setback in San Jose's CP zone?

25 ft (unless an approved Urban Village Plan sets a different figure) — San Jose Municipal Code § 20.40.200.

What is the minimum lot size in San Jose's CP zone?

6,000 sq ft (unless an approved Urban Village Plan sets a different figure) — San Jose Municipal Code § 20.40.200.

General information, not legal advice.

Ask about a San Jose property in CP

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on San Jose