Santa Fe Springs · Zoning · R-4
Santa Fe Springs R-4 zoning: height, setbacks and lot size
In Santa Fe Springs's R-4 zone, generally buildings can be up to 55 feet (4 stories) tall, the front setback is 15 feet and the minimum lot size is 20,000 square feet, with the conditions listed below (Santa Fe Springs code, read October 2026).
Key points
- Maximum building height: 55 feet (Taller buildings are allowed with an additional 5 feet of setback for each additional 10 feet of height.)
- Maximum number of stories: 4 stories (Taller buildings are allowed with an additional 5 feet of setback for each additional 10 feet of height.)
- Minimum front setback: 15 feet
- Minimum lot size: 20,000 square feet
- Maximum density: 40 du/ac
R-4 is a zoning district in Santa Fe Springs. Every value below was read from the Santa Fe Springs Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in R-4
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 55 feet Applies: Taller buildings are allowed with an additional 5 feet of setback for each additional 10 feet of height. § 155.093 · code textTable row “Maximum building height (base)”, column “R-4”: 4 stories; 55 feet |
|---|---|
| Maximum number of stories | 4 stories Applies: Taller buildings are allowed with an additional 5 feet of setback for each additional 10 feet of height. § 155.093 · code textTable row “Maximum building height (base)”, column “R-4”: 4 stories; 55 feet |
| Minimum front setback | 15 feet § 155.093 · code textTable row “Front”, column “R-4”: 15 feet |
| Minimum lot size | 20,000 square feet § 155.093 · code textTable row “Minimum lot area”, column “R-4”: 20,000 square feet |
| Maximum density | 40 du/ac § 155.093 · code textTable row “Maximum density 1”, column “R-4”: 40 du/ac |
When a different number applies
The code sets other values for particular lots, buildings or locations in R-4:
Not on this page
We did not find a general side setback, rear setback, lot coverage, FAR limit for R-4 in the zoning tables we read. The code may still set one elsewhere — check the Santa Fe Springs Municipal Code.
Other Santa Fe Springs zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Santa Fe Springs's R-4 zone?
55 feet (taller buildings are allowed with an additional 5 feet of setback for each additional 10 feet of height) — Santa Fe Springs Municipal Code § 155.093.
What is the maximum number of stories in Santa Fe Springs's R-4 zone?
4 stories (taller buildings are allowed with an additional 5 feet of setback for each additional 10 feet of height) — Santa Fe Springs Municipal Code § 155.093.
What is the minimum front setback in Santa Fe Springs's R-4 zone?
15 feet — Santa Fe Springs Municipal Code § 155.093.
What is the minimum lot size in Santa Fe Springs's R-4 zone?
20,000 square feet — Santa Fe Springs Municipal Code § 155.093.
What is the maximum density in Santa Fe Springs's R-4 zone?
40 du/ac — Santa Fe Springs Municipal Code § 155.093.
General information, not legal advice.
Ask about a Santa Fe Springs property in R-4
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question