Skip to content

Temecula · Zoning · PI

Temecula PI zoning: height, setbacks and lot size

In Temecula's PI zone, the front setback is 20 ft. and the minimum lot size is 7,000 sq. ft. (Temecula code, read October 2026).

Key points

  • Minimum front setback: 20 ft.
  • Minimum side setback: 5 ft.
  • Minimum rear setback: 15 ft.
  • Minimum lot size: 7,000 sq. ft.
  • Maximum lot coverage: 35%
  • Maximum floor area ratio (FAR): 0.3

PI (Public/Institutional District) is a zoning district in Temecula. Every value below was read from the Temecula Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in PI

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Minimum front setback
20 ft.
§ 17.12.040 · code text
Table row “Front yard”, column “PI District”: 20 ft.
Minimum side setback
5 ft.
§ 17.12.040 · code text
Table row “Interior side yard”, column “PI District”: 5 ft.
Minimum rear setback
15 ft.
§ 17.12.040 · code text
Table row “Rear yard”, column “PI District”: 15 ft.
Minimum lot size
7,000 sq. ft.
§ 17.12.040 · code text
Table row “Minimum lot size”, column “PI District”: 7,000 sq. ft.
Maximum lot coverage
35%
§ 17.12.040 · code text
Table row “Maximum lot coverage”, column “PI District”: 35%
Maximum floor area ratio (FAR)
0.3
§ 17.12.040 · code text
Table row “Floor area ratio”, column “PI District”: 0.3

Uses in PI

Uses the code's use tables allow in PI, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in PI:

  • Minimum rear setback: 20 ft. — Adjacent to an alley or street § 17.12.040

Not on this page

We did not find a general height, stories, density limit for PI in the zoning tables we read. The code may still set one elsewhere — check the Temecula Municipal Code.

Other Temecula zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the minimum front setback in Temecula's PI zone?

20 ft. — Temecula Municipal Code § 17.12.040.

What is the minimum side setback in Temecula's PI zone?

5 ft. — Temecula Municipal Code § 17.12.040.

What is the minimum rear setback in Temecula's PI zone?

15 ft. — Temecula Municipal Code § 17.12.040.

What is the minimum lot size in Temecula's PI zone?

7,000 sq. ft. — Temecula Municipal Code § 17.12.040.

What is the maximum lot coverage in Temecula's PI zone?

35% — Temecula Municipal Code § 17.12.040.

General information, not legal advice.

Ask about a Temecula property in PI

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Temecula