Skip to content

Temple City · Zoning · LTC

Temple City LTC zoning: height, setbacks and lot size

In Temple City's LTC zone, generally buildings can be up to 40 ft tall and the minimum lot size is 5,000 sq ft, with the conditions listed below (Temple City code, read October 2026).

Key points

  • Maximum building height: 40 ft (Within 20 ft of an R-zone, no portion of a building may exceed two stories and 30 ft)
  • Minimum side setback: 0 ft
  • Minimum rear setback: 0 ft
  • Minimum lot size: 5,000 sq ft
  • Maximum floor area ratio (FAR): 0.75

LTC is a zoning district in Temple City. Every value below was read from the Temple City Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in LTC

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
40 ft
Applies: Within 20 ft of an R-zone, no portion of a building may exceed two stories and 30 ft
See note 4 below the table in the code.
§ 9-1I-3 · code text
Table row “Height, maximum (feet) 4”, column “LTC”: 40 4
Note 4: No portion of a building may exceed two stories and 30 feet within 20 feet of an R-zone.
Minimum side setback
0 ft
§ 9-1I-3 · code text
Table row “Side, minimum (feet) 2”, column “LTC”: 0 2
Minimum rear setback
0 ft
§ 9-1I-3 · code text
Table row “Rear, minimum (feet) 3”, column “LTC”: 0 3
Minimum lot size
5,000 sq ft
§ 9-1I-3 · code text
Table row “Minimum lot area (square feet)”, column “LTC”: 5,000
Maximum floor area ratio (FAR)
0.75
See note 5 below the table in the code.
§ 9-1I-3 · code text
Table row “Floor Area Ratio 5”, column “LTC”: 0.75 5
Note 5: Commercial Unit: No commercial unit shall contain less than eight hundred (800) square feet of floor area.

Uses in LTC

Uses the code's use tables allow in LTC, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in LTC:

  • Maximum number of stories: 2 stories — within 20 feet of an R-zone; no portion of a building may exceed two stories and 30 feet § 9-1I-3
  • Minimum side setback: 5 ft — if the side of the commercial property shares a property line with a residential-zoned property § 9-1I-3
  • Minimum rear setback: 15 ft — if rear of the commercial property shares a property line with a residential-zoned property § 9-1I-3

Not on this page

We did not find a general stories, front setback, lot coverage, density limit for LTC in the zoning tables we read. The code may still set one elsewhere — check the Temple City Municipal Code.

Other Temple City zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Temple City's LTC zone?

40 ft (within 20 ft of an R-zone, no portion of a building may exceed two stories and 30 ft) — Temple City Municipal Code § 9-1I-3.

What is the minimum side setback in Temple City's LTC zone?

0 ft — Temple City Municipal Code § 9-1I-3.

What is the minimum rear setback in Temple City's LTC zone?

0 ft — Temple City Municipal Code § 9-1I-3.

What is the minimum lot size in Temple City's LTC zone?

5,000 sq ft — Temple City Municipal Code § 9-1I-3.

What is the maximum floor area ratio (far) in Temple City's LTC zone?

0.75 — Temple City Municipal Code § 9-1I-3.

General information, not legal advice.

Ask about a Temple City property in LTC

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Temple City