Trinity County · Zoning · C-3
Trinity County C-3 zoning: height, setbacks and lot size
In Trinity County's C-3 zone, buildings can be up to 25 ft tall and the front setback is 10 ft (Trinity County code, read October 2026).
Key points
- Maximum building height: 25 ft
- Minimum front setback: 10 ft
- Minimum side setback: 6 ft (Interior side yard)
- Minimum rear setback: 6 ft (none where the rear yard abuts a commercial or industrial parcel)
- Maximum lot coverage: 40%
C-3 (Heavy Commercial) is a zoning district in Trinity County. Every value below was read from the Trinity County Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in C-3
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 25 ft § 17.22A.060 · code textThe maximum building height shall be twenty-five feet. |
|---|---|
| Minimum front setback | 10 ft § 17.22A.070 · code textThe front yard setback shall have a minimum depth of ten feet. |
| Minimum side setback | 6 ft Applies: Interior side yard § 17.22A.080 · code textThe interior side yard setback shall be a minimum of six feet unless the side yard abuts a commercial or industrial zoned parcel in which case there are no setback requirements. |
| Minimum rear setback | 6 ft Applies: none where the rear yard abuts a commercial or industrial parcel § 17.22A.100 · code textThe rear yard setback shall be a minimum of six feet unless the rear yard abuts a commercially or industrial zoned parcel in which case there are no setback requirements. |
| Maximum lot coverage | 40% § 17.22A.110 · code textThe total lot area covered by structure shall not exceed forty percent of the total area of the lot. |
When a different number applies
The code sets other values for particular lots, buildings or locations in C-3:
- Minimum side setback: 0 ft — Side yard abuts a commercial or industrial zoned parcel § 17.22A.080
- Minimum rear setback: 0 ft — Rear yard abuts a commercially or industrial zoned parcel § 17.22A.100
Not on this page
We did not find a general stories, lot size, FAR, density limit for C-3 in the zoning tables we read. The code may still set one elsewhere — check the Trinity County Municipal Code.
Other Trinity County zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Trinity County's C-3 zone?
25 ft — Trinity County Municipal Code § 17.22A.060.
What is the minimum front setback in Trinity County's C-3 zone?
10 ft — Trinity County Municipal Code § 17.22A.070.
What is the minimum side setback in Trinity County's C-3 zone?
6 ft (interior side yard) — Trinity County Municipal Code § 17.22A.080.
What is the minimum rear setback in Trinity County's C-3 zone?
6 ft (none where the rear yard abuts a commercial or industrial parcel) — Trinity County Municipal Code § 17.22A.100.
What is the maximum lot coverage in Trinity County's C-3 zone?
40% — Trinity County Municipal Code § 17.22A.110.
General information, not legal advice.
Ask about a Trinity County property in C-3
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question