Skip to content

Williams · Zoning · AR

Williams AR zoning: height, setbacks and lot size

In Williams's AR zone, generally buildings can be up to 35 ft tall, the front setback is 50 ft and the minimum lot size is 1 acre, with the conditions listed below (Williams code, read October 2026).

Key points

  • Maximum building height: 35 ft (Single-family Detached Cluster)
  • Minimum front setback: 50 ft (Single-family Detached Cluster)
  • Minimum side setback: 5 ft (Single-family detached cluster; the two side yards together must total at least 10 ft)
  • Minimum lot size: 1 acre (Single-family Detached Cluster)
  • Maximum lot coverage: 10% (Single-family Detached Cluster)

AR is a zoning district in Williams. Every value below was read from the Williams Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in AR

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
35 ft
Applies: Single-family Detached Cluster
§ 17.02.090 · code text
Table row “Single-family Detached Cluster”, column “Height (ft.)”: 35
Minimum front setback
50 ft
Applies: Single-family Detached Cluster
§ 17.02.090 · code text
Table row “Single-family Detached Cluster”, column “Front Setback 1 (ft.)”: 50
Minimum side setback
5 ft
Applies: Single-family detached cluster; the two side yards together must total at least 10 ft
§ 17.02.090 · code text
Table row “Single-family Detached Cluster”, column “Side Setback Min./ Total (ft.) 2”: 5/10
Minimum lot size
1 acre
Applies: Single-family Detached Cluster
§ 17.02.090 · code text
Table row “Single-family Detached Cluster”, column “Lot Area”: 1 acre
Maximum lot coverage
10%
Applies: Single-family Detached Cluster
§ 17.02.090 · code text
Table row “Single-family Detached Cluster”, column “Building Coverage Ratio (%)”: 10%

Not on this page

We did not find a general stories, rear setback, FAR, density limit for AR in the zoning tables we read. The code may still set one elsewhere — check the Williams Municipal Code.

Other Williams zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Williams's AR zone?

35 ft (single-family Detached Cluster) — Williams Municipal Code § 17.02.090.

What is the minimum front setback in Williams's AR zone?

50 ft (single-family Detached Cluster) — Williams Municipal Code § 17.02.090.

What is the minimum side setback in Williams's AR zone?

5 ft (single-family detached cluster; the two side yards together must total at least 10 ft) — Williams Municipal Code § 17.02.090.

What is the minimum lot size in Williams's AR zone?

1 acre (single-family Detached Cluster) — Williams Municipal Code § 17.02.090.

What is the maximum lot coverage in Williams's AR zone?

10% (single-family Detached Cluster) — Williams Municipal Code § 17.02.090.

General information, not legal advice.

Ask about a Williams property in AR

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Williams