Skip to content

Woodland · Zoning · DX-2

Woodland DX-2 zoning: height, setbacks and lot size

In Woodland's DX-2 zone, generally buildings can be up to 55 ft tall and the front setback is 0 ft, with the conditions listed below (Woodland code, read October 2026).

Key points

  • Maximum building height: 55 ft
  • Minimum front setback: 0 ft (front and street side; also a maximum of 20 ft)
  • Minimum side setback: 5 ft
  • Minimum rear setback: 0 ft (10 ft adjacent to DX-3 or any residential zone)
  • Maximum lot coverage: 70%
  • Maximum floor area ratio (FAR): 4.0 (a minimum FAR of 1.0 also applies; extra FAR may be granted for community benefits)

DX-2 is a zoning district in Woodland. Every value below was read from the Woodland Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in DX-2

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
55 ft
§ 17.28.030 · code text
Table row “Principal Structure”, column “DX-2”: Max. 55 ft., 50 ft. within 50 ft. of DX-3 zone
Minimum front setback
0 ft
Applies: front and street side; also a maximum of 20 ft
§ 17.28.030 · code text
Table row “Front and Street Side”, column “DX-2”: Min. 0 ft.; Max. 20 ft.
Minimum side setback
5 ft
§ 17.28.030 · code text
Table row “Interior Side”, column “DX-2”: 5 ft.
Minimum rear setback
0 ft
Applies: 10 ft adjacent to DX-3 or any residential zone
§ 17.28.030 · code text
Table row “Rear”, column “DX-2”: Min. 0 ft.; Min. 10 ft. adjacent to DX-3 or any residential zone
Maximum lot coverage
70%
§ 17.28.030 · code text
Table row “Max. Lot Coverage”, column “DX-2”: 70%
Maximum floor area ratio (FAR)
4.0
Applies: a minimum FAR of 1.0 also applies; extra FAR may be granted for community benefits
§ 17.28.030 · code text
Table row “FAR of Residential and Nonresidential Combined”, column “DX-2”: Min. 1.0, Max. 4.0 (A)

Uses in DX-2

Uses the code's use tables allow in DX-2, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in DX-2:

  • Maximum building height: 50 ft — within 50 ft. of DX-3 zone § 17.28.030
  • Minimum rear setback: 10 ft — adjacent to DX-3 or any residential zone § 17.28.030

Not on this page

We did not find a general stories, lot size, density limit for DX-2 in the zoning tables we read. The code may still set one elsewhere — check the Woodland Municipal Code.

Other Woodland zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Woodland's DX-2 zone?

55 ft — Woodland Municipal Code § 17.28.030.

What is the minimum front setback in Woodland's DX-2 zone?

0 ft (front and street side; also a maximum of 20 ft) — Woodland Municipal Code § 17.28.030.

What is the minimum side setback in Woodland's DX-2 zone?

5 ft — Woodland Municipal Code § 17.28.030.

What is the minimum rear setback in Woodland's DX-2 zone?

0 ft (10 ft adjacent to DX-3 or any residential zone) — Woodland Municipal Code § 17.28.030.

What is the maximum lot coverage in Woodland's DX-2 zone?

70% — Woodland Municipal Code § 17.28.030.

General information, not legal advice.

Ask about a Woodland property in DX-2

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Woodland