Skip to content

Chapter 6 — REFERENCED ORGANIZATIONS AND STANDARDS

Section 601 — GENERAL

2025 California Green Building Standards Code (Title 24, Part 11) · 2025 edition · updated 2026-07-25 · California

601.1 This chapter lists the organizations and standards that are referenced in various…

listed according the promulgating agency of the standard.

STANDARD ACRONYM or
NUMBER
STANDARD NAME or TITLE REFERENCED
SECTION
~~**AABC **~~Associated Air Balance Council, 1518 K St NW, Washington, DC
20005www.aabc.com
National Standards, 1989
Total System Balance
5.410.4.3.1, A5.410.5.3.1
ACCA Air Conditioning Contractors of America, 2800 Shirlington Road, Suite 300, Arlington, VA 22206
www.acca.org
ANSI/ACCA 1 Manual D–2016 Residential Duct Systems 4.507.2
ANSI/ACCA 2 Manual J–2016 Residential Load Calculations 4.507.2
ANSI/ACCA 3 Manual S–2014 Residential Equipment Selection 4.507.2
ACI American Concrete Institute, 38800 Country Club Drive, Farmington Hills, MI 48331-3439
www.concrete.org
ACI CT-21
Concrete Terminology
A5.405.5.2.1.1
~~**AHAM **~~Association of Home Appliance Manufacturers, 1119 19th Street NW, Suite 402, Washington, D.C. 20026-3627
http://www.aham.org
ANSI/AHAM DW-1-2010 Household Electric Dishwashers 202
ASHRAEAmerican Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. 180 Technology Parkway NW, Peachtree Corners, GA 30092
www.ashrae.org
ANSI/ASHRAE
Standard 52.2- 2017
Method of Testing General Ventilation Air-Cleaning Devices for Removal Efficiency
by Particle Size
5.504.1
ASME American Society of Mechanical Engineers, Three Park Avenue, New York, NY 10016-5990
www.asme.org
ASME A112.18.1 Plumbing Supply Fittings 5.303.6
ASME A112.19.2 Ceramic Plumbing Fixtures WS-2
ASME A112.19.14
Six-Liter Water Closets Equipped with a Dual Flushing Device
WS-2, 5.303.6
~~**ASTM **~~ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2859
www.astm.org
ASTM C31/C31M-19 Standard Practice for Making and Curing Concrete Test Specimens in the Field A5.405.5.3.4
ASTM C33 Standard Specification for Concrete Aggregates A5.405.5.3.2
ASTM C150 Standard Specification for Portland Cement A5.405.5.1
ASTM C595 Standard Specification for Blended Hydraulic Cements A5.405.5.1
ASTM C618 Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in
Concrete
A5.405.5.2.1
ASTM C989 Standard Specification for Slag Cement for Use in Concrete and Mortars A5.405.5.2.1
ASTM C1157 Standard Performance Specification for Hydraulic Cement A5.405.5.1
ASTM C1240 Standard Specification for Silica Fume Used in Cementitious Mixtures A5.405.5.2.1
ASTM C1371-98 Standard Test Method for Determination of Emittance of Materials Near Room
Temperature Using Portable Emissometers
A5.106.11.2.2
ASTM C1549-09(2014) Standard Test Method for Determination of Solar Reflectance Near Ambient
Temperature Using a Portable Solar Reflectometer
A4.106.7, A5.106.11.1
ASTM C1602 Standard Specification for Mixing Water Used in the Production of Hydraulic
Cement Concrete
A5.405.5.3.2.3
ASTM C1697 Standard Specification for Blended Supplementary Cementitious Materials A5.405.5.2.1
ASTM C1798/C1798M-19 Standard Specification for Returned Fresh Concrete for Use in a New Batch of
Ready-Mixed Concrete
A5.405.5.3.5
ASTM C1866/C1866M-20 Standard Specification for Ground-Glass Pozzolan for Use in Concrete A5.405.5.2.1

on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.

REFERENCED ORGANIZATIONS AND STANDARDS

STANDARD ACRONYM or
NUMBER
STANDARD NAME or TITLE REFERENCED
SECTION
~~ASTM~~ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2859
www.astm.org
ASTM D7612-2021 Standard Practice for Categorizing Wood and Wood-Based Products According to
Their Fiber Sources
A5.405.2.1
ASTM E90 Standard Test Method for Laboratory Measurement of Airborne Sound
Transmission Loss of Building Partitions and Elements
5.507.4
ASTM E408-02 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-
Meter Techniques
A5.10, 6.11.2.2
ASTM E413 Classification for Rating Sound Insulation 5.507.4
ASTM E1332 Standard Classification for Rating Outdoor-Indoor Sound Attenuation 5.507.4
ASTM E1333-14 Standard Test Method for Determining Formaldehyde Concentrations in Air and
Emission Rates from Wood Products Using a Large Chamber
Tables 4.504.5,
5.504.4.5, 5.504.8.5
ASTM E1903-11 Standard Practice for Environmental Site Assessments: Phase II Environmental Site
Assessment Process
A5.103.2.1
ASTM E1918-06(2015) Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-
Sloped Surfaces in the Field
A4.106.7
ASTM E1918-16 (2016) Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-
Sloped Surfaces in the Field
A5.106.11.1
ASTM E1980-11 Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-
Sloped Opaque Surfaces
A4.106.5.3,
A5.106.11.2.3
ASTM E2921-2022
Standard Practice for Minimum Criteria for Comparing Whole Building Life Cycle
Assessments for Use with Building Codes, Standards, and Rating Systems
5.409.2, A5.409.2
CSA Canadian Standards Association, 5060 Spectrum Way, Suite 100 Mississauga, Ontario, Canada L4W 5N6
www.csa.ca
CSA B125.1 Plumbing supply fittings 4.504.5.1
CSA O121 Douglas fir plywood 4.504.5.1
CSA O151 Canadian softwood plywood 4.504.5.1
CSA O153 Poplar plywood 4.504.5.1
CSA O325
Construction sheathing
4.504.5.1
~~EN~~European Standards, European and International standards online store - European Standards
www.en-standard.eu
EN 15804-2012 + A2:2019 Sustainability of construction works. Environmental product declarations. Core
rules for the product category of construction products
5.409.2, A5.409.2.1,
A5.409.2.2
EN 15978:2011
Sustainability of construction works. Assessment of environmental performance of
buildings. Calculation method
5.409.2, A5.409.2.1,
A5.409.2.2
IAPMO International Association of Plumbing and Mechanical Officials, 4755 E. Philadelphia St. Ontario, CA 91761
iapmo@iapmo.org
IAPMO Z124.9
Plastic Plumbing Fixtures
5.303.6
IESNA Illuminating Engineering Society of North America, 170 Wall St., Floor 17, New York, NY 10005-4001
http://www.ies.org
IES TM-15-11
Luminaire Classification System for Outdoor Luminaires
5.10, 6.6, A4.106.10
ISO International Organization for Standardization, ISO Central Secretariat Chemin de Blandonnet 8, CP 401 - 1214 Vernier, Geneva, Switzerland
https://www.iso.org
ISO 14040-2006+A1:2020 Environmental management — Life cycle assessment — Principles and framework 5.409.2, A5.409.2.1,
A5.409.2.2
ISO 14044-2006+A1:2020 Environmental management — Life cycle assessment — Requirements and
guidelines
5.409.2, A5.409.2.1,
A5.409.2.2
ISO 21930-2017 Sustainability in buildings and civil engineering works — Core rules for
environmental product declarations of construction products and services
5.409.2, A5.409.2.1,
A5.409.2.2
ISO 21931-2017
Sustainability in buildings and civil engineering works — Framework for methods of
assessment of the environmental, social and economic performance of
construction works as a basis for sustainability assessment
5.409.2, A5.409.2.1,
A5.409.2.2
~~**NEBB **~~National Environmental Balancing Bureau, 8575 Grovemont Cir, Gaithersburg, MD 20877
http://nebb.org/index.php
Procedural Standards, 1983 Procedural Standards 5.410.4.3.1

6-4 2025 CALIFORNIA GREEN BUILDING STANDARDS CODE

on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.

REFERENCED ORGANIZATIONS AND STANDARDS

STANDARD ACRONYM or
NUMBER
STANDARD NAME or TITLE REFERENCED
SECTION
NSF International, 789 Dixboro Rd., Ann Arbor, MI 48113-0140
http://www.nsf.org/
NSF/ANSI 140-2014
Sustainability Assessment for Carpet
4.504.3
TABB Testing, Adjusting and Balancing Bureau, 601 N Fairfax St, Ste 250, Alexandria, VA 22314
http://www.tabbcertified.org/contact.html
National Standards, 2003
National Standards
5.410.4.3.1
US EPA United States Environmental Protection Agency, Office of Wastewater Management (4204M) 1200 Pennsylvania Avenue, Washington, D.C. 20460
http://www.epa.gov/watersense/
WaterSense WaterSense Product Specifications 4.303.1

on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.

6-6 2025 CALIFORNIA GREEN BUILDING STANDARDS CODE

on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.

CALIFORNIA GREEN BUILDING STANDARDS CODE – MATRIX ADOPTION TABLE

CHAPTER 7 – INSTALLER AND SPECIAL INSPECTOR QUALIFICATIONS

(Matrix Adoption Tables are nonregulatory, intended only as an aid to the code user. See Chapter 1 for state agency authority and building applications.)

Adopting agency BSC BSC-
CG
SFM HCD DSA OSHPD BSCC DPH AGR DWR CEC CA SL SLC
Adopting agency BSC BSC-
CG
SFM 1 2 1/AC AC SS 1 1R 2 3 4 5 5 5 5 5 5 5 5 5
Adopt entire CA chapter X
Adopt entire chapter as
amended (amended
sections listed below)
Adopt only those sections
that are listed below
X
Chapter/Section
702.2 X
703.1 X

on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.

7-2 2025 CALIFORNIA GREEN BUILDING STANDARDS CODE

on Jul 18, 2025 11:14 AM (CDT) THEREUNDER.

Get a plain-English answer with a citation back to this text.

Ask AI about this code
Contents — 2025 California Green Building Standards Code (Title 24, Part 11)

GoCodebook provides public access, search, citation, multilingual explanation, and practical interpretation of legally adopted building regulations. It is not a substitute for the official ICC or California code publications.