Title 17 — Zoning›Division II — DISTRICT REGULATIONS
Chapter 17.18 — C-1 OR NEIGHBORHOOD COMMERCIAL DISTRICT
Escalon Zoning Code · 2026-06 edition · updated 2026-07-06 · Escalon
§ 17.18.010. Purpose. ¶
The neighborhood commercial (C-1) district provides small-scale commercial centers in which certain convenience goods and related services typically used on a daily basis are made available within walking distance of residential neighborhoods, while not competing with services unique to the downtown. Development standards are intended to prevent significant adverse effects on residential uses adjoining a C-1 district.
(Ord. 495 § 1, 2005)
§ 17.18.020. Permitted uses. ¶
The uses listed in the table in EMC § 17.11.040 as permitted uses are allowed. (Ord. 495 § 1, 2005)
§ 17.18.030. Conditional uses. ¶
In addition to the uses authorized by EMC § 17.18.020 , the uses listed in the table in EMC § 17.11.040 as requiring a conditional use permit are allowed if a conditional use permit is issued. (Ord. 495 § 1, 2005)
§ 17.18.040. Development standards. ¶
Development standards in the C-1 district shall be as follows:
A. Minimum lot area: 5,000 square feet.
B. Floor area ratio: 0.5.
C. Minimum lot width: 50 feet.
D. Maximum height: 35 feet.
E. Minimum Setbacks.
Front: 15 feet.
Side: None required.
Rear: None required.
The following minimum yard requirements apply along those property lines of a lot in the C- 1 zone which abut or are across the street or alley from a lot in a residential zone:
a. Front: 20 feet.
b. Side abutting street: 10 feet.
c. Side or rear: 20 feet.
F. Building Mass. The maximum square footage of any one building footprint shall not exceed 20,000 square feet.
(Ord. 495 § 1, 2005)
Get a plain-English answer with a citation back to this text.
Ask AI about this code▸ Contents — Escalon Zoning Code
-
▸ Title 17 — Zoning
Overview- Division I — GENERAL PROVISIONS
-
▸ Division II — DISTRICT REGULATIONS
Overview- Chapter 17.10 — ZONING DISTRICTS/BOUNDARIES
- Chapter 17.11 — LIST OF PERMITTED USES AND USES PERMITTED BY C…
- Chapter 17.12 — GENERAL REQUIREMENTS FOR RESIDENTIAL DISTRICTS
- Chapter 17.13 — R-E OR ESTATE RESIDENTIAL DISTRICT
- Chapter 17.14 — R-1 OR LOW DENSITY RESIDENTIAL DISTRICT
- Chapter 17.15 — R-2 OR MEDIUM DENSITY RESIDENTIAL DISTRICT
- Chapter 17.16 — R-3 OR MULTIPLE-FAMILY RESIDENTIAL DISTRICT
- Chapter 17.17 — GENERAL REQUIREMENTS FOR COMMERCIAL DISTRICTS
- Chapter 17.18 — C-1 OR NEIGHBORHOOD COMMERCIAL DISTRICT
- Chapter 17.19 — C-2 OR COMMUNITY COMMERCIAL DISTRICT
- Chapter 17.20 — C-M OR COMMERCIAL-INDUSTRIAL DISTRICT
- Chapter 17.21 — GENERAL REQUIREMENTS FOR INDUSTRIAL DISTRICTS
- Chapter 17.22 — M-1 OR LIMITED MANUFACTURING DISTRICT
- Chapter 17.23 — M-2 OR GENERAL MANUFACTURING DISTRICT
- Chapter 17.24 — PD OR PLANNED DEVELOPMENT DISTRICT
- Chapter 17.26 — O OR OPEN SPACE DISTRICT
- Chapter 17.27 — PF OR PUBLIC FACILITIES DISTRICT
- Division III — OVERLAY DISTRICT REGULATIONS
- Division IV — REGULATIONS APPLYING TO ALL DISTRICTS
- Division V — ADMINISTRATION
- Division VI — ENFORCEMENT AND PENALTIES
- Division VII — DEFINITIONS
- Division VIII — SPECIFIC USE REGULATIONS