Humboldt County Municipal Code § 314-34 “S” Combining Zone Designations

Zone Regulations. The Development Standard Combining Zone Regulations are intended to allow modification of the specific development standards in the principal zones to more precisely implement the General Plan. (Former Section INL#315-9(a))

2 of this division, may include the Development Standard Combining Zone with any principal Zone. In including the Development Standard Combining Zone with a principal zone, the Board of Supervisors may modify any or all of the following development standards: (Former Section INL#315-9(b)(1-8))

to the following limitations: (Former Section INL#315-9(c)(1-3))

when the zoning district to be modified will include a minimum area of four (4) acres or four (4) city blocks.

designated on the adopted zoning maps by the designation “S,” except as provided herein. (Former Section INL#315-9(d))

shall immediately follow the maximum density designation. (Former Section INL#315-9(d))

maps in a table format in the order listed in this Section. Arabic numerals shall be used in the table to specify all modified development standards, except for permitted principal building types. Permitted building types shall be represented by name in the table. Minimum Lot Size shall be represented by a number which represents thousands of square feet, followed by the lower case letter “s”; or by a number which represents numbers of acres, followed by the lower case “a”, whichever is appropriate. For example, RS7.5s would require a minimum lot size of 7500 square feet. (Former Section INL#315-9(d))

Development Standard Combining Zone is used to modify a principal zone to allow manufactured homes as permitted building types, the following designations shall be used as applicable: (Former Section INL#315-9(e))

modified. (Former Section INL#315-9(e)(1))

modified for the sole purpose of allowing manufactured homes. (Former Section INL#315-9(e)(2))

Both Specified. Whenever the Development Standard Combining Zone is used to modify the principal zone to specify a minimum lot size and a minimum average-lot size that must be maintained in subdividing any lot within the zone, the following designations shall be used as applicable: (Former Section INL#315-9(g))

size, and where the subdivision of any parcel results in a density consistent with the General Plan. As part of the subdivision action, a rezone to the appropriate SY(x) or Y(x) parcel size designation shall be required, and, as necessary, other enforceable restrictions shall be required to maintain consistency with the General Plan. (Former Section INL#315-9(g)(3))

Development Standard Combining Zone is used to modify the principal zone to prohibit further subdivisions of any lots within the zone, the following designations shall be used as applicable: (Former Section INL#315-9(f))

sole purpose of prohibiting further subdivisions of any lots within the zone.