Solano County Municipal Code § 26-41 Lot line adjustments

An application for a lot line adjustment, as defined in Section 66412 of the Subdivision Map Act and this Chapter, shall be on a form satisfactory to the Director of Environmental Management and shall be accompanied by documents containing all of the information specified in Section 26-41.1, provided that the Advisory Agency may, in individual cases, permit the omission of items of information deemed by it not to be necessary for a proper review of the application.

(Ord. No. 1608, §2;)

The application for a lot line adjustment shall include the following:

(a) A preliminary title report current within the last 60 days for all of the property affected by the lot line adjustment.

(b) The number of copies as required by the Director of Environmental Management of the lot line adjustment map accurately drawn to scale. Measurements shall be identified by feet or meters and shall include the area in square feet, square meters or acres. One copy of the map reduced to eight and one-half inches by eleven inches, (215 mm x 280 mm), shall also be submitted.

(c) The map shall meet the following criteria:

(1) The scale of the map shall be one inch equals one hundred feet, (metric scale of 1:1000), or larger.

(2) In or near the lower right-hand corner of the first sheet:

(A) Name and address of the owners of the properties being adjusted;

(B) North point and scale of map;

(C) Name and address of person preparing the map;

(D) Date the map was prepared;

(3) All exterior and interior lines shall be shown on the map and shall be identified by course and bearing description, based on survey data, calculated data, or information of record. If a survey is done, any monuments established must be shown on a record of survey filed in accordance with the Professional Land Surveyors Act, Business and Professions Code Sections 8700 et seq.

(4) Proposed new lines and lines to be eliminated shall be so identified in written notation or by legend. Lines to be eliminated shall be dashed or otherwise drawn so as to be clearly distinguishable from remaining and new lines.

(5) The area of all existing and proposed parcels shall be identified and listed in acres, square feet or square meters.

(6) All existing structures, wells, septic tanks, leach fields, driveways, fences, tree rows, significant trees, public utility lines, and other prominent features located on the original parcels shall be accurately located, identified, and drawn to scale. A registered civil engineer or licensed land surveyor when deemed necessary by the Planning Services Division shall establish such locations.

(7) The locations, names, county road numbers, and widths of all adjoining and contiguous highways, streets, and roads.

(8) The locations, purpose, and width of all existing and proposed easements, roads and appurtenant utilities.

(9) The approximate location of all watercourses, drainage channels, and existing drainage structures.

(10) The approximate location of other topographic or man-made features, such as bluff tops and ponds.

(11) The approximate high-water line and elevation in lakes or reservoirs, and the mean high tide line along tidal channels.

(12) The location of all areas subject to inundation or storm water overflows.

(Ord. No. 1608, §2)