Brawley · Land use · Single-family home
Where is a single-family home allowed in Brawley?
In Brawley, a single-family home is allowed in 6 base zones (R-A, R-E, R-1, R-2, R-3 and 1 more) and not allowed in 2 (Brawley use tables, read October 2026).
Key points
- Allowed: R-A, R-E, R-1, R-2, R-3 and R
- Not allowed: MHS and MHP
Find your lot's zone on the city zoning map, then read its row. Every status below was read from the Brawley Municipal Code use tables (read October 2026). Base zones only. General information, not legal advice — check with the city before you apply.
Zones where a single-family home can go
Brawley's code calls this use “Dwellings, single-family”. Each row links to the use table it comes from. A zone marked “see note” has a condition in the code, for example upper floors only or a larger lot.
Zones where it is not allowed
What else applies
- Commercial table S2 has only a generic 'Residences' row (C-P and C-1 conditional, C-2 and C-3 prohibited); not used because it does not say single-family detached.
- State law: State law lets most single-family lots add an ADU and a JADU (California ADU law) and a second home or a lot split under SB 9 (Gov. Code § 65852.21).
- Not covered here: P-D (planned development) zones. Overlay zones and specific plans can also change the answer.
Other uses in Brawley
Who this affects
Frequently asked questions
Can I have a single-family home in the MHS zone in Brawley?
No. Brawley's use table does not allow it in MHS (§ 27.72).
Can I have a single-family home in the R-A zone in Brawley?
Yes. Brawley's use table lists it as allowed in R-A (§ 27.72).
General information, not legal advice.
Ask about a single-family home at an address in Brawley
Ask GoCodebook what the zoning at a specific address allows and get an answer that cites the section.
Ask your question