Skip to content

Concord · Zoning · RL

Concord RL zoning: height, setbacks and lot size

In Concord's RL zone, generally buildings can be up to 30 ft tall, the front setback is 5 ft and the minimum lot size is 1,920 sq ft, with the conditions listed below (Concord code, read October 2026).

Key points

  • Maximum building height: 30 ft (Residential)
  • Minimum front setback: 5 ft (Residential)
  • Minimum side setback: 5 ft (Residential)
  • Minimum rear setback: 5 ft (Residential)
  • Minimum lot size: 1,920 sq ft (Residential)
  • Maximum lot coverage: 50% (Residential)

RL is a zoning district in Concord. Every value below was read from the Concord Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in RL

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
30 ft
Applies: Residential
See note 5 below the table in the code.
§ 18.30.040 · code text
Table row “Residential”, column “RL (5)”: 30
Note 5: Additional requirements may apply pursuant to Chapter 18.120 CDC (Affirmatively Furthering Fair Housing Overlay District).
Minimum front setback
5 ft
Applies: Residential
See note 5 below the table in the code.
§ 18.30.040 · code text
Table row “Front, minimum”, column “RL (5)”: 5
Note 5: Additional requirements may apply pursuant to Chapter 18.120 CDC (Affirmatively Furthering Fair Housing Overlay District).
Minimum side setback
5 ft
Applies: Residential
See note 5 below the table in the code.
§ 18.30.040 · code text
Table row “Interior Side, minimum”, column “RL (5)”: 5
Note 5: Additional requirements may apply pursuant to Chapter 18.120 CDC (Affirmatively Furthering Fair Housing Overlay District).
Minimum rear setback
5 ft
Applies: Residential
See note 5 below the table in the code.
§ 18.30.040 · code text
Table row “Rear , minimum”, column “RL (5)”: 5
Note 5: Additional requirements may apply pursuant to Chapter 18.120 CDC (Affirmatively Furthering Fair Housing Overlay District).
Minimum lot size
1,920 sq ft
Applies: Residential
See note 5 below the table in the code.
§ 18.30.040 · code text
Table row “Residential”, column “RL (5)”: 1,920
Note 5: Additional requirements may apply pursuant to Chapter 18.120 CDC (Affirmatively Furthering Fair Housing Overlay District).
Maximum lot coverage
50%
Applies: Residential
See note 5 below the table in the code.
§ 18.30.040 · code text
Table row “Residential”, column “RL (5)”: 50
Note 5: Additional requirements may apply pursuant to Chapter 18.120 CDC (Affirmatively Furthering Fair Housing Overlay District).

Uses in RL

Uses the code's use tables allow in RL, or allow with a permit. Each links to its page with the code section.

Not on this page

We did not find a general stories, FAR, density limit for RL in the zoning tables we read. The code may still set one elsewhere — check the Concord Municipal Code.

Other Concord zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Concord's RL zone?

30 ft (residential) — Concord Municipal Code § 18.30.040.

What is the minimum front setback in Concord's RL zone?

5 ft (residential) — Concord Municipal Code § 18.30.040.

What is the minimum side setback in Concord's RL zone?

5 ft (residential) — Concord Municipal Code § 18.30.040.

What is the minimum rear setback in Concord's RL zone?

5 ft (residential) — Concord Municipal Code § 18.30.040.

What is the minimum lot size in Concord's RL zone?

1,920 sq ft (residential) — Concord Municipal Code § 18.30.040.

General information, not legal advice.

Ask about a Concord property in RL

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Concord