Danville · Zoning · D-1
Danville D-1 zoning: height, setbacks and lot size
In Danville's D-1 zone, generally the front setback is 20 ft and the minimum lot size is 8,000 sq ft, with the conditions listed below (Danville code, read October 2026).
Key points
- Minimum front setback: 20 ft (Same as the R-6 district (Section 32-22.7).)
- Minimum side setback: 10 ft (Same as the R-10 district (Section 32-22.7): at least 10 ft on each side and at least 20 ft on both sides together.)
- Minimum rear setback: 20 ft (Same as the R-6 district (Section 32-22.7).)
- Minimum lot size: 8,000 sq ft
D-1 (Two Family District) is a zoning district in Danville. Every value below was read from the Danville Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in D-1
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Minimum front setback | 20 ft Applies: Same as the R-6 district (Section 32-22.7). § 32-23.5 · code textSetback (front yard) provisions for the D-l district shall be the same as those for the R-6 district (Section 32-22.7). |
|---|---|
| Minimum side setback | 10 ft Applies: Same as the R-10 district (Section 32-22.7): at least 10 ft on each side and at least 20 ft on both sides together. § 32-23.5 · code textSide yard provisions for the D-l district shall be the same as those for the R-10 district (Section 32-22.7). |
| Minimum rear setback | 20 ft Applies: Same as the R-6 district (Section 32-22.7). § 32-23.5 · code textRear yard provisions for the D-l district shall be the same as those for the R-6 district (Section 32-22.7). |
| Minimum lot size | 8,000 sq ft § 32-23.4 · code textNo two (2) family dwelling of other structure permitted in the D-l district shall be erected or placed on a lot smaller than eight thousand (8,000) square feet in area. |
Not on this page
We did not find a general height, stories, lot coverage, FAR, density limit for D-1 in the zoning tables we read. The code may still set one elsewhere — check the Danville Municipal Code.
Other Danville zoning districts
Who this affects
Frequently asked questions
What is the minimum front setback in Danville's D-1 zone?
20 ft (same as the R-6 district (Section 32-22.7)) — Danville Municipal Code § 32-23.5.
What is the minimum side setback in Danville's D-1 zone?
10 ft (same as the R-10 district (Section 32-22.7): at least 10 ft on each side and at least 20 ft on both sides together) — Danville Municipal Code § 32-23.5.
What is the minimum rear setback in Danville's D-1 zone?
20 ft (same as the R-6 district (Section 32-22.7)) — Danville Municipal Code § 32-23.5.
What is the minimum lot size in Danville's D-1 zone?
8,000 sq ft — Danville Municipal Code § 32-23.4.
General information, not legal advice.
Ask about a Danville property in D-1
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question