Danville · Zoning · R-65
Danville R-65 zoning: height, setbacks and lot size
In Danville's R-65 zone, the front setback is 25 feet and the minimum lot size is 65,000 square feet (Danville code, read October 2026).
Key points
- Minimum front setback: 25 feet
- Minimum side setback: 20 feet
- Minimum rear setback: 30 feet
- Minimum lot size: 65,000 square feet
R-65 is a zoning district in Danville. Every value below was read from the Danville Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in R-65
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Minimum front setback | 25 feet § 32-22.7 · code textTable row “R-20, R-40 and R-65”, column “Minimum Primary Front Yard Setback”: 25 feet |
|---|---|
| Minimum side setback | 20 feet § 32-22.7 · code textTable row “R-40 and R-65”, column “Minimum Side Yard Setback”: 20 feet |
| Minimum rear setback | 30 feet § 32-22.7 · code textTable row “R-20, R-40, R-65, and R-100”, column “Minimum Rear Yard Setback”: 30 feet |
| Minimum lot size | 65,000 square feet § 32-22.6 · code textTable row “R-65”, column “Minimum Lot Area”: 65,000 square feet |
Not on this page
We did not find a general height, stories, lot coverage, FAR, density limit for R-65 in the zoning tables we read. The code may still set one elsewhere — check the Danville Municipal Code.
Other Danville zoning districts
Who this affects
Frequently asked questions
What is the minimum front setback in Danville's R-65 zone?
25 feet — Danville Municipal Code § 32-22.7.
What is the minimum side setback in Danville's R-65 zone?
20 feet — Danville Municipal Code § 32-22.7.
What is the minimum rear setback in Danville's R-65 zone?
30 feet — Danville Municipal Code § 32-22.7.
What is the minimum lot size in Danville's R-65 zone?
65,000 square feet — Danville Municipal Code § 32-22.6.
General information, not legal advice.
Ask about a Danville property in R-65
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question