Skip to content

Dixon · Zoning · DMX

Dixon DMX zoning: height, setbacks and lot size

In Dixon's DMX zone, buildings can be up to 50 ft tall and the front setback is 0 ft (Dixon code, read October 2026).

Key points

  • Maximum building height: 50 ft
  • Minimum front setback: 0 ft
  • Minimum side setback: 0 ft (Where not adjacent to an R district)
  • Minimum rear setback: 0 ft (Where not adjacent to an R district)
  • Maximum floor area ratio (FAR): 3.0
  • Maximum density: 30 units per acre

DMX is a zoning district in Dixon. Every value below was read from the Dixon Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in DMX

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
50 ft
§ 18.05.030 · code text
Table row “Maximum Height (ft)”, column “DMX”: 50
Minimum front setback
0 ft
§ 18.05.030 · code text
Table row “Front”, column “DMX”: 0, except as provided below for garages
Minimum side setback
0 ft
Applies: Where not adjacent to an R district
§ 18.05.030 · code text
Table row “Interior Side”, column “DMX”: Adjacent to an R district: 20 Other areas: 0
Minimum rear setback
0 ft
Applies: Where not adjacent to an R district
§ 18.05.030 · code text
Table row “Rear”, column “DMX”: Adjacent to an R district: 20 Other areas: 0
Maximum floor area ratio (FAR)
3.0
§ 18.05.030 · code text
Table row “Maximum”, column “DMX”: 3.0
Maximum density
30 units per acre
§ 18.05.030 · code text
Table row “Maximum”, column “DMX”: 30

Uses in DMX

Uses the code's use tables allow in DMX, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in DMX:

  • Minimum front setback: 22 ft — Garages with entries parallel to the front property line § 18.05.030
  • Minimum front setback: 15 ft — Garages with entries perpendicular to the front property line with curved driveways § 18.05.030
  • Minimum side setback: 20 ft — Adjacent to an R district § 18.05.030
  • Minimum rear setback: 20 ft — Adjacent to an R district § 18.05.030

Not on this page

We did not find a general stories, lot size, lot coverage limit for DMX in the zoning tables we read. The code may still set one elsewhere — check the Dixon Municipal Code.

Other Dixon zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Dixon's DMX zone?

50 ft — Dixon Municipal Code § 18.05.030.

What is the minimum front setback in Dixon's DMX zone?

0 ft — Dixon Municipal Code § 18.05.030.

What is the minimum side setback in Dixon's DMX zone?

0 ft (where not adjacent to an R district) — Dixon Municipal Code § 18.05.030.

What is the minimum rear setback in Dixon's DMX zone?

0 ft (where not adjacent to an R district) — Dixon Municipal Code § 18.05.030.

What is the maximum floor area ratio (far) in Dixon's DMX zone?

3.0 — Dixon Municipal Code § 18.05.030.

General information, not legal advice.

Ask about a Dixon property in DMX

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Dixon