Fowler · Zoning · PF
Fowler PF zoning: height, setbacks and lot size
In Fowler's PF zone, buildings can be up to 35 ft tall, the front setback is 10 ft and the minimum lot size is 0 sq ft (Fowler code, read October 2026).
Key points
- Maximum building height: 35 ft
- Minimum front setback: 10 ft
- Minimum side setback: 5 ft
- Minimum rear setback: 10 ft
- Minimum lot size: 0 sq ft
- Maximum lot coverage: 40%
PF is a zoning district in Fowler. Every value below was read from the Fowler Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in PF
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 35 ft § 9.135.040 · code textTable row “Maximum Building Height”, column “PF”: 35 |
|---|---|
| Minimum front setback | 10 ft § 9.135.040 · code textTable row “Front Yard”, column “PF”: 10 |
| Minimum side setback | 5 ft § 9.135.040 · code textTable row “Interior Side Yard 2”, column “PF”: 5 |
| Minimum rear setback | 10 ft § 9.135.040 · code textTable row “Rear Yard 2”, column “PF”: 10 |
| Minimum lot size | 0 sq ft § 9.135.040 · code textTable row “Site Area (sqft)”, column “PF”: 0 |
| Maximum lot coverage | 40% § 9.135.040 · code textTable row “Maximum Lot Coverage”, column “PF”: 40% |
When a different number applies
The code sets other values for particular lots, buildings or locations in PF:
- Minimum side setback: 10 ft — Where a commercial lot directly abuts a lot within a residential district § 9.135.040
Not on this page
We did not find a general stories, FAR, density limit for PF in the zoning tables we read. The code may still set one elsewhere — check the Fowler Municipal Code.
Other Fowler zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Fowler's PF zone?
35 ft — Fowler Municipal Code § 9.135.040.
What is the minimum front setback in Fowler's PF zone?
10 ft — Fowler Municipal Code § 9.135.040.
What is the minimum side setback in Fowler's PF zone?
5 ft — Fowler Municipal Code § 9.135.040.
What is the minimum rear setback in Fowler's PF zone?
10 ft — Fowler Municipal Code § 9.135.040.
What is the minimum lot size in Fowler's PF zone?
0 sq ft — Fowler Municipal Code § 9.135.040.
General information, not legal advice.
Ask about a Fowler property in PF
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question