Skip to content

Gustine · Zoning · R-1

Gustine R-1 zoning: height, setbacks and lot size

In Gustine's R-1 zone, buildings can be up to 30 ft tall, the front setback is 20 ft and the minimum lot size is 6,000 sq ft (Gustine code, read October 2026).

Key points

  • Maximum building height: 30 ft
  • Minimum front setback: 20 ft
  • Minimum side setback: 5 ft
  • Minimum rear setback: 10 ft (800 sq ft of the rear third of the lot must stay uncovered)
  • Minimum lot size: 6,000 sq ft
  • Maximum density: 6 dwellings per gross acre

R-1 (Single-Family Residential) is a zoning district in Gustine. Every value below was read from the Gustine Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in R-1

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
30 ft
§ 4-22-040 · code text
Table row “Maximum height”, column “R-1 Single-Family Residential”: 30 ft
Minimum front setback
20 ft
§ 4-22-040 · code text
Table row “Front”, column “R-1 Single-Family Residential”: 20 ft
Minimum side setback
5 ft
§ 4-22-040 · code text
Table row “Sides — Interior”, column “R-1 Single-Family Residential”: 5 ft
Minimum rear setback
10 ft
Applies: 800 sq ft of the rear third of the lot must stay uncovered
§ 4-22-040 · code text
Table row “Rear”, column “R-1 Single-Family Residential”: 10 ft, 800 sf left uncovered on rear ⅓ of lot
Minimum lot size
6,000 sq ft
§ 4-22-040 · code text
Table row “R-1”, column “Area (net in sf)”: 6,000
Maximum density
6 dwellings per gross acre
§ 4-22-040 · code text
Table row “Maximum density as per General Plan”, column “R-1 Single-Family Residential”: 6 dwellings per gross acre

Uses in R-1

Uses the code's use tables allow in R-1, or allow with a permit. Each links to its page with the code section.

Not on this page

We did not find a general stories, lot coverage, FAR limit for R-1 in the zoning tables we read. The code may still set one elsewhere — check the Gustine Municipal Code.

Other Gustine zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Gustine's R-1 zone?

30 ft — Gustine Municipal Code § 4-22-040.

What is the minimum front setback in Gustine's R-1 zone?

20 ft — Gustine Municipal Code § 4-22-040.

What is the minimum side setback in Gustine's R-1 zone?

5 ft — Gustine Municipal Code § 4-22-040.

What is the minimum rear setback in Gustine's R-1 zone?

10 ft (800 sq ft of the rear third of the lot must stay uncovered) — Gustine Municipal Code § 4-22-040.

What is the minimum lot size in Gustine's R-1 zone?

6,000 sq ft — Gustine Municipal Code § 4-22-040.

General information, not legal advice.

Ask about a Gustine property in R-1

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Gustine