Skip to content

Gustine · Zoning · R-3

Gustine R-3 zoning: height, setbacks and lot size

In Gustine's R-3 zone, buildings can be up to 35 ft tall, the front setback is 15 ft and the minimum lot size is 7,500 sq ft (Gustine code, read October 2026).

Key points

  • Maximum building height: 35 ft
  • Minimum front setback: 15 ft
  • Minimum side setback: 5 ft
  • Minimum rear setback: 15 ft
  • Minimum lot size: 7,500 sq ft
  • Maximum density: 20 dwellings per acre

R-3 (Multiple Residential) is a zoning district in Gustine. Every value below was read from the Gustine Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in R-3

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
35 ft
§ 4-22-040 · code text
Table row “Maximum height”, column “R-3 Multiple Residential”: 35 ft
Minimum front setback
15 ft
§ 4-22-040 · code text
Table row “Front”, column “R-3 Multiple Residential”: 15
Minimum side setback
5 ft
§ 4-22-040 · code text
Table row “Sides — Interior”, column “R-3 Multiple Residential”: 5 ft
Minimum rear setback
15 ft
§ 4-22-040 · code text
Table row “Rear”, column “R-3 Multiple Residential”: 15 ft
Minimum lot size
7,500 sq ft
§ 4-22-040 · code text
Table row “R-3”, column “Area (net in sf)”: 7,500 1
Maximum density
20 dwellings per acre
§ 4-22-040 · code text
Table row “Maximum density as per General Plan”, column “R-3 Multiple Residential”: 20 dwellings per acre1

Uses in R-3

Uses the code's use tables allow in R-3, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in R-3:

  • Minimum lot size: 2,000 sq ft — parcels for ownership in a condominium, townhome or small lot project; the whole site must still meet the lot area and density rules § 4-22-040

Not on this page

We did not find a general stories, lot coverage, FAR limit for R-3 in the zoning tables we read. The code may still set one elsewhere — check the Gustine Municipal Code.

Other Gustine zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Gustine's R-3 zone?

35 ft — Gustine Municipal Code § 4-22-040.

What is the minimum front setback in Gustine's R-3 zone?

15 ft — Gustine Municipal Code § 4-22-040.

What is the minimum side setback in Gustine's R-3 zone?

5 ft — Gustine Municipal Code § 4-22-040.

What is the minimum rear setback in Gustine's R-3 zone?

15 ft — Gustine Municipal Code § 4-22-040.

What is the minimum lot size in Gustine's R-3 zone?

7,500 sq ft — Gustine Municipal Code § 4-22-040.

General information, not legal advice.

Ask about a Gustine property in R-3

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Gustine