Isleton · Zoning · PDI
Isleton PDI zoning: height, setbacks and lot size
In Isleton's PDI zone, generally buildings can be up to 75 ft tall and the front setback is 10 ft, with the conditions listed below (Isleton code, read October 2026).
Key points
- Maximum building height: 75 ft (a greater height may be approved for tanks, towers, silos and similar facilities)
- Minimum front setback: 10 ft
- Minimum side setback: None required
- Minimum rear setback: None required
- Maximum lot coverage: No limitation
PDI (Planned Industrial Districts) is a zoning district in Isleton. Every value below was read from the Isleton Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in PDI
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Maximum building height | 75 ft Applies: a greater height may be approved for tanks, towers, silos and similar facilities § 905 · code textNo greater than 75 feet except that a greater height may be approved for tanks, towers, silos and similar facilities under the provisions of article 4. |
|---|---|
| Minimum front setback | 10 ft § 905 · code textThe minimum front yard shall be ten (10) feet. |
| Minimum side setback | None required § 905 · code textExcept as provided below, no rear or side yards shall be required: |
| Minimum rear setback | None required § 905 · code textExcept as provided below, no rear or side yards shall be required: |
| Maximum lot coverage | No limitation § 905 · code textCoverage: No limitations. |
When a different number applies
Not on this page
We did not find a general stories, lot size, FAR, density limit for PDI in the zoning tables we read. The code may still set one elsewhere — check the Isleton Municipal Code.
Other Isleton zoning districts
Who this affects
Frequently asked questions
What is the maximum building height in Isleton's PDI zone?
75 ft (a greater height may be approved for tanks, towers, silos and similar facilities) — Isleton Municipal Code § 905.
What is the minimum front setback in Isleton's PDI zone?
10 ft — Isleton Municipal Code § 905.
What is the minimum side setback in Isleton's PDI zone?
None required — Isleton Municipal Code § 905.
What is the minimum rear setback in Isleton's PDI zone?
None required — Isleton Municipal Code § 905.
What is the maximum lot coverage in Isleton's PDI zone?
No limitation — Isleton Municipal Code § 905.
General information, not legal advice.
Ask about an Isleton property in PDI
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question