Isleton · Zoning · RM-2.0
Isleton RM-2.0 zoning: height, setbacks and lot size
In Isleton's RM-2.0 zone, the front setback is 15 ft and the minimum lot size is 2,000 sq. ft. (Isleton code, read October 2026).
Key points
- Minimum front setback: 15 ft
- Minimum rear setback: 5 ft
- Minimum lot size: 2,000 sq. ft.
- Maximum lot coverage: 60%
- Maximum density: 1 unit per 2,000 sq. ft.
RM-2.0 is a zoning district in Isleton. Every value below was read from the Isleton Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.
Development standards in RM-2.0
The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.
| Minimum front setback | 15 ft § 704 · code textThe minimum front yard shall be 15 feet. |
|---|---|
| Minimum rear setback | 5 ft § 704 · code textThe minimum rear yard shall be five feet. |
| Minimum lot size | 2,000 sq. ft. § 704 · code textThe minimum lot area shall be 3,000 square feet in the RM-3.0 districts, 2,000 square feet in the RM-2.0 districts and 4,000 square feet in the RM-4.0 district. |
| Maximum lot coverage | 60% § 704 · code textTable row “RM-2.0”, column “Area Per Unit”: 60% |
| Maximum density | 1 unit per 2,000 sq. ft. § 704 · code textTable row “RM-2.0”, column “Area Per Unit”: 2,000 sq. ft. |
When a different number applies
The code sets other values for particular lots, buildings or locations in RM-2.0:
- Minimum front setback: 20 ft — Garages or carports opening parallel to the street § 704
Not on this page
We did not find a general height, stories, side setback, FAR limit for RM-2.0 in the zoning tables we read. The code may still set one elsewhere — check the Isleton Municipal Code.
Other Isleton zoning districts
Who this affects
Frequently asked questions
What is the minimum front setback in Isleton's RM-2.0 zone?
15 ft — Isleton Municipal Code § 704.
What is the minimum rear setback in Isleton's RM-2.0 zone?
5 ft — Isleton Municipal Code § 704.
What is the minimum lot size in Isleton's RM-2.0 zone?
2,000 sq. ft. — Isleton Municipal Code § 704.
What is the maximum lot coverage in Isleton's RM-2.0 zone?
60% — Isleton Municipal Code § 704.
What is the maximum density in Isleton's RM-2.0 zone?
1 unit per 2,000 sq. ft. — Isleton Municipal Code § 704.
General information, not legal advice.
Ask about an Isleton property in RM-2.0
Ask GoCodebook what you can build at a specific address and get an answer that cites the section.
Ask your question