Skip to content

Livingston · Zoning · R-2

Livingston R-2 zoning: height, setbacks and lot size

In Livingston's R-2 zone, buildings can be up to 30 ft tall, the front setback is 15 ft and the minimum lot size is 5,500 sq. ft. (Livingston code, read October 2026).

Key points

  • Maximum building height: 30 ft
  • Minimum front setback: 15 ft
  • Minimum side setback: 5 ft (Adjoining residences must be at least 8 ft apart)
  • Minimum rear setback: 20 ft
  • Minimum lot size: 5,500 sq. ft.
  • Maximum lot coverage: 0.40 of the site area
  • Maximum floor area ratio (FAR): 0.50

R-2 (Medium Density Residential District) is a zoning district in Livingston. Every value below was read from the Livingston Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in R-2

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
30 ft
§ 5-3-16 · code text
Table row “R-2”, column “Maximum Structure Height (In Feet)”: 30
Minimum front setback
15 ft
§ 5-3-16 · code text
Table row “R-2”, column “Minimum Front Yard Setback”: 15
Minimum side setback
5 ft
Applies: Adjoining residences must be at least 8 ft apart
See note 2 below the table in the code.
§ 5-3-16 · code text
Table row “R-2”, column “Minimum Side Yard Setback”: 5 2
Note 2: In no instance shall residence on adjoining R-2 lots be closer than 8 feet from primary structure to primary structure, except on the side next to a street on a corner lot, which shall be 15 feet deep; if a garage is present, or if developing on a reverse corner lot, street side yard setback shall be 20 feet
Minimum rear setback
20 ft
§ 5-3-16 · code text
Table row “R-2”, column “Minimum Rear Yard Setback”: 20
Minimum lot size
5,500 sq. ft.
§ 5-3-16 · code text
Table row “R-2”, column “Minimum Lot Area”: 5,500 sq. ft. (2,750 sq. ft. per dwelling unit)
Maximum lot coverage
0.40 of the site area
§ 5-3-16 · code text
Table row “R-2”, column “Maximum Site Coverage (%)”: 0.40
Maximum floor area ratio (FAR)
0.50
§ 5-3-16 · code text
Table row “R-2”, column “Maximum Floor Area Ratio (FAR)”: 0.50

Uses in R-2

Uses the code's use tables allow in R-2, or allow with a permit. Each links to its page with the code section.

Not on this page

We did not find a general stories, density limit for R-2 in the zoning tables we read. The code may still set one elsewhere — check the Livingston Municipal Code.

Other Livingston zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Livingston's R-2 zone?

30 ft — Livingston Municipal Code § 5-3-16.

What is the minimum front setback in Livingston's R-2 zone?

15 ft — Livingston Municipal Code § 5-3-16.

What is the minimum side setback in Livingston's R-2 zone?

5 ft (adjoining residences must be at least 8 ft apart) — Livingston Municipal Code § 5-3-16.

What is the minimum rear setback in Livingston's R-2 zone?

20 ft — Livingston Municipal Code § 5-3-16.

What is the minimum lot size in Livingston's R-2 zone?

5,500 sq. ft. — Livingston Municipal Code § 5-3-16.

General information, not legal advice.

Ask about a Livingston property in R-2

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Livingston