Skip to content

Livingston · Zoning · R-3

Livingston R-3 zoning: height, setbacks and lot size

In Livingston's R-3 zone, buildings can be up to 40 ft tall, the front setback is 15 ft and the minimum lot size is 6,500 sq. ft. (Livingston code, read October 2026).

Key points

  • Maximum building height: 40 ft
  • Minimum front setback: 15 ft
  • Minimum side setback: 5 ft (Interior lot)
  • Minimum rear setback: 15 ft
  • Minimum lot size: 6,500 sq. ft.
  • Maximum lot coverage: 0.60 of the site area
  • Maximum floor area ratio (FAR): 0.50

R-3 (High Density Residential District) is a zoning district in Livingston. Every value below was read from the Livingston Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in R-3

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
40 ft
§ 5-3-16 · code text
Table row “R-3”, column “Maximum Structure Height (In Feet)”: 40
Minimum front setback
15 ft
§ 5-3-16 · code text
Table row “R-3”, column “Minimum Front Yard Setback”: 15
Minimum side setback
5 ft
Applies: Interior lot
See note 3 below the table in the code.
§ 5-3-16 · code text
Table row “R-3”, column “Minimum Side Yard Setback”: 5 3
Note 3: Each interior lot in an R-3 District shall have a minimum side yard of 5 feet; corner lots shall have 15 feet, except in the case of a reverse corner lot or a garage; then it shall be 20 feet
Minimum rear setback
15 ft
§ 5-3-16 · code text
Table row “R-3”, column “Minimum Rear Yard Setback”: 15
Minimum lot size
6,500 sq. ft.
§ 5-3-16 · code text
Table row “R-3”, column “Minimum Lot Area”: 6,500 sq. ft. (1,500 sq. ft. per dwelling unit)
Maximum lot coverage
0.60 of the site area
§ 5-3-16 · code text
Table row “R-3”, column “Maximum Site Coverage (%)”: 0.60
Maximum floor area ratio (FAR)
0.50
§ 5-3-16 · code text
Table row “R-3”, column “Maximum Floor Area Ratio (FAR)”: 0.50

Uses in R-3

Uses the code's use tables allow in R-3, or allow with a permit. Each links to its page with the code section.

When a different number applies

The code sets other values for particular lots, buildings or locations in R-3:

  • Minimum side setback: 15 ft — Corner lot § 5-3-16

Not on this page

We did not find a general stories, density limit for R-3 in the zoning tables we read. The code may still set one elsewhere — check the Livingston Municipal Code.

Other Livingston zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Livingston's R-3 zone?

40 ft — Livingston Municipal Code § 5-3-16.

What is the minimum front setback in Livingston's R-3 zone?

15 ft — Livingston Municipal Code § 5-3-16.

What is the minimum side setback in Livingston's R-3 zone?

5 ft (interior lot) — Livingston Municipal Code § 5-3-16.

What is the minimum rear setback in Livingston's R-3 zone?

15 ft — Livingston Municipal Code § 5-3-16.

What is the minimum lot size in Livingston's R-3 zone?

6,500 sq. ft. — Livingston Municipal Code § 5-3-16.

General information, not legal advice.

Ask about a Livingston property in R-3

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Livingston