Skip to content

Madera County · Zoning · ARF

Madera County ARF zoning: height, setbacks and lot size

In Madera County's ARF zone, generally buildings can be up to 35 ft tall, the front setback is 25 ft and the minimum lot size is 2½ acres, with the conditions listed below (Madera County code, read October 2026).

Key points

  • Maximum building height: 35 ft (maximum dwelling height)
  • Minimum front setback: 25 ft
  • Minimum side setback: 10 ft
  • Minimum rear setback: 20 ft
  • Minimum lot size: 2½ acres
  • Maximum lot coverage: 40%
  • Maximum density: 2 DU per lot

ARF is a zoning district in Madera County. Every value below was read from the Madera County Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in ARF

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
35 ft
Applies: maximum dwelling height
§ 18.53.030 · code text
Table row “Maximum dwelling height”, column “ARF”: 35
Minimum front setback
25 ft
§ 18.53.030 · code text
Table row “Front setback (ft.)”, column “ARF”: 25
Minimum side setback
10 ft
§ 18.53.030 · code text
Table row “Side setback (ft.)”, column “ARF”: 10
Minimum rear setback
20 ft
§ 18.53.030 · code text
Table row “Rear setback (ft.)”, column “ARF”: 20
Minimum lot size
2½ acres
§ 18.53.030 · code text
Table row “Minimum Lot area”, column “ARF”: 2½
Maximum lot coverage
40%
§ 18.53.030 · code text
Table row “Maximum lot coverage (%)”, column “ARF”: 40
Maximum density
2 DU per lot
§ 18.53.030 · code text
Table row “Maximum permitted density (DU per lot)”, column “ARF”: 2

Uses in ARF

Uses the code's use tables allow in ARF, or allow with a permit. Each links to its page with the code section.

Not on this page

We did not find a general stories, FAR limit for ARF in the zoning tables we read. The code may still set one elsewhere — check the Madera County Municipal Code.

Other Madera County zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Madera County's ARF zone?

35 ft (maximum dwelling height) — Madera County Municipal Code § 18.53.030.

What is the minimum front setback in Madera County's ARF zone?

25 ft — Madera County Municipal Code § 18.53.030.

What is the minimum side setback in Madera County's ARF zone?

10 ft — Madera County Municipal Code § 18.53.030.

What is the minimum rear setback in Madera County's ARF zone?

20 ft — Madera County Municipal Code § 18.53.030.

What is the minimum lot size in Madera County's ARF zone?

2½ acres — Madera County Municipal Code § 18.53.030.

General information, not legal advice.

Ask about a Madera County property in ARF

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Madera County