Skip to content

Madera County · Zoning · RX

Madera County RX zoning: height, setbacks and lot size

In Madera County's RX zone, generally buildings can be up to 35 ft tall, the front setback is 10 ft and the minimum lot size is 3,000 sq ft, with the conditions listed below (Madera County code, read October 2026).

Key points

  • Maximum building height: 35 ft (main/primary structure)
  • Minimum front setback: 10 ft
  • Minimum side setback: 5 ft
  • Minimum rear setback: 10 ft
  • Minimum lot size: 3,000 sq ft
  • Maximum lot coverage: 85%
  • Maximum floor area ratio (FAR): 80% (the same for 1, 2 and 3 story buildings)

RX is a zoning district in Madera County. Every value below was read from the Madera County Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in RX

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
35 ft
Applies: main/primary structure
§ 18.11.120 · code text
Table row “Max. structure height”, column “13”: 35
Minimum front setback
10 ft
§ 18.11.120 · code text
Table row “Front setback (ft.) from right-of-way”, column “13”: 10
Minimum side setback
5 ft
§ 18.11.120 · code text
Table row “Side setback (ft.) — over 1 ac. under 1 ac.”, column “13”: 5
Minimum rear setback
10 ft
§ 18.11.120 · code text
Table row “Rear setback (ft.)”, column “13”: 10
Minimum lot size
3,000 sq ft
§ 18.11.120 · code text
Table row “Min. lot area”, column “13”: 3000
Maximum lot coverage
85%
§ 18.11.120 · code text
Table row “Max. lot coverage (%)”, column “13”: 85
Maximum floor area ratio (FAR)
80%
Applies: the same for 1, 2 and 3 story buildings
§ 18.11.120 · code text
Table row “1 story building”, column “13”: 80

Not on this page

We did not find a general stories, density limit for RX in the zoning tables we read. The code may still set one elsewhere — check the Madera County Municipal Code.

Other Madera County zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Madera County's RX zone?

35 ft (main/primary structure) — Madera County Municipal Code § 18.11.120.

What is the minimum front setback in Madera County's RX zone?

10 ft — Madera County Municipal Code § 18.11.120.

What is the minimum side setback in Madera County's RX zone?

5 ft — Madera County Municipal Code § 18.11.120.

What is the minimum rear setback in Madera County's RX zone?

10 ft — Madera County Municipal Code § 18.11.120.

What is the minimum lot size in Madera County's RX zone?

3,000 sq ft — Madera County Municipal Code § 18.11.120.

General information, not legal advice.

Ask about a Madera County property in RX

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Madera County