Skip to content

Oroville · Zoning · RR-1

Oroville RR-1 zoning: height, setbacks and lot size

In Oroville's RR-1 zone, buildings can be up to 40 feet tall, the front setback is 20 feet and the minimum lot size is 1 acre (Oroville code, read October 2026).

Key points

  • Maximum building height: 40 feet
  • Minimum front setback: 20 feet
  • Minimum side setback: 10 feet
  • Minimum rear setback: 20 feet
  • Minimum lot size: 1 acre
  • Maximum lot coverage: 10,000 sq. ft.

RR-1 is a zoning district in Oroville. Every value below was read from the Oroville Municipal Code and links to its section (read October 2026). State laws such as the ADU and SB 9 rules can allow more on a residential lot. General information, not legal advice — read the code text and check with the city before you build.

Development standards in RR-1

The general rule for a typical lot in this zone. Zoning tables often attach notes, such as rules for corner lots, lots next to a residential zone, or new subdivisions only. Open “code text” under a value to see the table cell or sentence it was read from.

Maximum building height
40 feet
§ 17.28.020 · code text
Table row “Height, Maximum 3”, column “RR-1”: 40 feet
Minimum front setback
20 feet
§ 17.28.020 · code text
Table row “Front”, column “RR-1”: 20 feet 4
Minimum side setback
10 feet
§ 17.28.020 · code text
Table row “Side”, column “RR-1”: 10 feet
Minimum rear setback
20 feet
§ 17.28.020 · code text
Table row “Rear”, column “RR-1”: 20 feet
Minimum lot size
1 acre
§ 17.28.020 · code text
Table row “Lot Area, Minimum”, column “RR-1”: 1 acre
Maximum lot coverage
10,000 sq. ft.
§ 17.28.020 · code text
Table row “Site Coverage, Maximum”, column “RR-1”: 10,000 sq. ft.

Uses in RR-1

Uses the code's use tables allow in RR-1, or allow with a permit. Each links to its page with the code section.

Not on this page

We did not find a general stories, FAR, density limit for RR-1 in the zoning tables we read. The code may still set one elsewhere — check the Oroville Municipal Code.

Other Oroville zoning districts

Who this affects

HomeownersArchitects and designersDevelopersReal estate agents

Frequently asked questions

What is the maximum building height in Oroville's RR-1 zone?

40 feet — Oroville Municipal Code § 17.28.020.

What is the minimum front setback in Oroville's RR-1 zone?

20 feet — Oroville Municipal Code § 17.28.020.

What is the minimum side setback in Oroville's RR-1 zone?

10 feet — Oroville Municipal Code § 17.28.020.

What is the minimum rear setback in Oroville's RR-1 zone?

20 feet — Oroville Municipal Code § 17.28.020.

What is the minimum lot size in Oroville's RR-1 zone?

1 acre — Oroville Municipal Code § 17.28.020.

General information, not legal advice.

Ask about an Oroville property in RR-1

Ask GoCodebook what you can build at a specific address and get an answer that cites the section.

Ask your question

More on Oroville